Menu

Package BOQ Items

Sno. Item No. Item Unit Rate/Unit Target Quantity Executed Quantity % Progress
1 EW-2 Earth work in excavation by mechanical means (Hydraulic excavator) / manual means over areas (exceeding 30cm in depth. 1.5 m in width as well as 10 sqm on plan) including getting out and disposal of excavated earth, lead upto 50m and lift upto 1.5m, as directed by Engineer incharge . :All kinds of soil. Cum 150.000 21092.77 19321.14 91.6
2 EW-3 Earth work in excavation by mechanical means (Hydraulic excavator) / manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including getting out and disposal of excavated earth, lead upto 50m and lift upto 1.5m, as directed by Engineer incharge .:Ordinary rock Cum 400.000 721.92 0.00 0
3 EW-4 Extra for every additional lift of 1.5 m or part there of in excavation /banking excavated or stacked materials. All kinds of soil Cum 100.000 594.06 594.06 100
4 EW-5 Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m. Cum 100.000 14218.03 0.00 0
5 EW-6 Supplying and filling in plinth with Jamuna sand under floors, including watering, ramming, consolidating and dressing complete. Cum 1500.000 1004.22 0.00 0
6 EW-8 (A) All kinds of soil, Pipes, cables etc. not exceeding 80 mm dia Rm 121.000 73.03 0.00 0
7 EW-9 (B) All kinds of soil, Pipes, cables etc. exceeding 80 mm dia. but not exceeding 300 mm dia Rm 221.000 1757.00 0.00 0
8 PW-10 Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : 1:4:8 (1 Cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size) Cum 4750.000 818.81 0.00 0
9 PW-11 Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : 1:3:6 (1 Cement : 3 coarse sand : 6 graded stone aggregate 40 mm nominal size) Cum 5001.000 1968.46 732.05 37.19
10 PW-12 Providing and laying damp-proof course 40 mm thick with cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 12.5 mm nominal size). Sqm 101.000 1233.08 0.00 0
11 PW-13 Proving & Applying a coat of residual petroleum bitumen of grade of VG-10 of approved quality using 1.7 kg per square metre on damp proof course after cleaning the surface with brushes and finally with a piece of cloth lightly soaked in kerosene oil. Sqm 51.000 1233.08 0.00 0
12 PW-14 Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level: 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) Cum 6500.000 134.65 0.00 0
13 PW-15 Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : 1:5:10 (1 Cement : 5 coarse sand : 10 brick aggregate 40 mm nominal size) for sunken portion Cum 4201.000 271.08 0.00 0
14 RCC-17 (A) All works upto plinth level Cum 7000.000 3816.00 2848.74 74.65
15 RCC-18 (B) All works above plinth level upto floor V level Cum 7500.000 6815.46 63.85 0.94
16 RCC-19 Add for using extra cement in the items of design mix over and above the specified cement content therein. qtl. 651.000 1099.33 1099.33 100
17 SW-21 (A) Foundations, footings, bases of columns, etc. for mass concrete Sqm 400.000 10023.61 3100.18 30.93
18 SW-22 (B) Walls (any thickness) including attached pilasters, butteresses, plinth and string courses etc. continue…. Sqm 601.000 765.93 0.00 0
19 SW-23 (C) Columns, Pillars, Piers, Abutments, Posts and Struts Sqm 550.000 11815.53 1274.49 10.79
20 SW-24 (D) Lintels, beams, plinth beams, girders, bressumers and cantilevers. Sqm 430.000 16288.10 2264.98 13.91
21 SW-25 (E) Suspended floors, roofs, landings, balconies and access platform. sqm 550.000 26460.28 6.88 0.03
22 SW-26 (F) Stairs, (excluding landings) except spiral-staircases Sqm 550.000 1555.17 8.54 0.55
23 SW-27 Extra for additional height in centering, shuttering where ever required with adequate bracing, propping etc., including cost of de-shuttering and decentering at all levels, over a height of 3.5 m, for every additional height of 1 metre or part thereof (Plan area to be measured). Suspended floors, roofs, landing, beams and balconies (Plan area to be measured) Sqm 260.000 1170.67 0.00 0
24 REW-29 A) upto plinth level. T.M.T bars of grade Fe-500D or more. kg 80.000 368937.50 242229.61 65.66
25 REW-30 B) above plinth level. T.M.T bars of grade Fe-500D or more. kg 80.000 1159584.00 29482.00 2.54
26 SW-31 Centering and shuttering including strutting, propping etc. and removal of form for all height:Edges of slabs and breaks in floors and walls Under 20 cm wide Rm 200.000 1201.52 45.44 3.78
27 SW-32 Centering and shuttering including strutting, propping etc. and removal of form for all height: Edges of slabs and breaks in floors and walls Above 20 cm wide Sqm 800.000 600.76 3.22 0.54
28 BW-33 Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundation and plinth in: Cement mortar 1:6 (1 cement : 6 coarse sand) Cum 7000.000 2046.33 0.00 0
29 BW-34 Brick work with non modular fly ash bricks conforming to IS:12894, class designation 10 average compressive strength in super structure above plinth level up to floor V level in : Cement mortar 1:6 (1 cement : 6 coarse sand) Cum 7500.000 50.00 0.00 0
30 ACC-35 Providing and laying autoclaved aerated cement blocks masonry with 100mm/200mm/300 mm thick AAC blocks (density (551-650)kg/m3 and minimum compressive strength 4N/mm2 AAC blocks (Grade-I) ) in super tructure above plinth level up to floor V level with RCC band at sill level and lintel level with approved block laying polymer modified adhesive mortar all complete as per direction of Engineerin- Charge. (The payment of RCC band and reinforcement shall be made for seperately). Cum 7000.000 5483.51 0.00 0
31 DW-37 A) 35 mm thick including ISI marked Stainless Steel butt hinges with necessary screws Sqm 3000.000 963.53 0.00 0
32 DW-38 B) 25 mm thick (for cupboard) including ISI marked nickel plated bright finished M.S. Piano hinges IS : 3818 marked with necessary screws Sqm 2500.000 232.88 0.00 0
33 DW-40 A) 35 mm thick including ISI marked Stainless Steel butt hinges with necessary screws Sqm 2000.000 1571.74 0.00 0
34 DW-41 B) 25 mm thick (for cupboard) including ISI marked nickel plated bright finished MS Piano hinges with necessary screws. Sqm 1800.000 767.84 0.00 0
35 DW-42 Providing and fixing wire gauge shutters using galvanized M.S. wire gauge of average width of aperture 1.4 mm in both directions with wire of dia 0.63 mm, for doors, windows and clerestory windows with hinges and necessary screws :35 mm thick shutters with ISI marked M.S. pressed butt hinges bright finished of required size, Second class teak wood Sqm 4500.000 617.19 0.00 0
36 DW-44 The styles and rails will be mitred cut and joint with the help of PVC solvent cement & self driven self tapping screws. Single piece extruded solid PVC lock rail of size 100 mm x 30 mm with wall thickness 5 mm & 15 mm integrally extruded in the middle of the lock rail & fixed with style with the help of PVC solvent cement & self driven self tapping screws of size 100 mm x 8 mm complete as per manufacturer’s specifications and direction of Engineer-in-charge. Non decorative finish sqm 7100.000 79.17 0.00 0
37 DW-46 A) 250x16 mm sliding door bolts Nos 130.000 913.00 0.00 0
38 DW-47 B) 250x10 mm Tower bolt black finish (barrel type ) Nos 60.000 2602.00 0.00 0
39 DW-48 C) 150x10 mm Tower bolt black finish (barrel type ) Nos 40.000 7794.00 0.00 0
40 DW-49 D) 125 mm handles conforming to IS 4992 Nos 25.000 2602.00 0.00 0
41 DW-50 E) 100 mm handles conforming to IS 4992 Nos 20.000 7794.00 0.00 0
42 DW-51 Providing and fixing ISI marked Oxidised M.S. 200 mm Casement stays (straight peg type) with necessary screws etc. complete, weighing not less than 120 gms Nos 15.000 6224.00 0.00 0
43 DW-53 A) 250x16 mm sliding door bolts Nos 175.000 144.00 0.00 0
44 DW-54 B) 250x10 mm Tower bolt Nos 80.000 501.00 0.00 0
45 DW-55 C) 150x10 mm Tower bolt Nos 60.000 1332.00 0.00 0
46 DW-56 D) 125 mm handles Nos 50.000 501.00 0.00 0
47 DW-57 E) 100 mm handles Nos 40.000 1332.00 0.00 0
48 DW-58 F) hanging floor door stopper, Twin rubber stopper Nos 35.000 1016.00 0.00 0
49 DW-59 Providing and fixing aluminium die cast body tubular type universal hydraulic door closer (having brand logo with ISI, IS : 3564, embossed on the body, door weight upto 35 kg and door width upto 700 mm), with necessary accessories and screws etc. complete Nos 400.000 410.00 0.00 0
50 DW-60 Providing and fixing 300mm SS friction stay to windows with necessary accessories and screws etc. complete all as specified set 325.000 1332.00 0.00 0
51 DW-61 Extra for providing lipping with 2nd class teak wood battens 25 mm minimum depth on all edges of flush door shutters (over all area of door shutter to be measured). Sqm 300.000 3533.78 0.00 0
52 DW-62 Providing and fixing special quality bright finished brass cupboard or ward robe locks with four levers of approved quality including necessary screws etc. complete. 50 mm nos 190.000 262.00 0.00 0
53 DW-63 Providing and fixing magnetic catcher of approved quality in cupboard / ward robe shutters, including fixing with necessary screws etc. complete. : Triple strip vertical type nos 25.000 262.00 0.00 0
54 DW-65 (a) For fixed portition: Powder coated aluminium (minimum thickness of powder coating 50 micron) kg 500.000 1307.99 0.00 0
55 DW-66 (b) For shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber / neoprene gasket required (Fittings shall be paid for separately): Powder coated aluminium (minimum thickness of powder coating 50 micron) kg 550.000 4391.23 0.00 0
56 DW-67 Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge. (Cost of aluminium snap beading shall be paid in basic item): With float glass panes of 5.50 mm thickness. Sqm 1000.000 585.09 0.00 0
57 DW-68 Providing and fixing anodised aluminium grill (anodised transparent or dyed to required shade according to IS: 1868 with minimum anodic coating of grade AC 15) of approved design/pattern, with approved standard section and fixed to the existing window frame with C.P. brass/ stainless steel screws @ 200 mm centre to centre, including cutting the grill to proper opening size for fixing and operation of handles and fixing approved anodised aluminium standard section around the opening, all complete as per requirement and direction of Engineer-in-charge. (Only weight of grill to be measured for payment). kg. 600.000 2091.06 0.00 0
58 DW-70 (A) "Profile C" Fixing with adjustable lugs with split end tail to each jamb Rm 450.000 8662.39 0.00 0
59 DW-71 (B) "Profile E" Fixing with adjustable lugs with split end tail to each jamb Rm 500.000 6279.38 0.00 0
60 DW-72 Providing and fixing factory made door frame (single rebate) made out of single piece extruded solid PVC foam profile with homogenous fine cellular structure having smooth outer integral skin having 62 mm width & 32 mm thickness, frame will be mitred & Jointed with self driven self tapping screws of size 38 mm x 4 mm & PVC solvent cement , including fixing the frame to wall with suitable dia & length anchor fastener as per manufacturer’s specification and direction of Engineer-in-charge. Rm 375.000 197.90 0.00 0
61 DW-73 Providing and fixing factory made ISI marked steel glazed doors, windows and ventilators, side /top /centre hung, with beading and all members such as F7D, F4B, K11 B and K12 B etc. complete of standard rolled steel sections, joints mitred and flash butt welded and sash bars tenoned and riveted, including providing and fixing of hinges, pivots, including priming coat of approved steel primer, but excluding the cost of other fittings, complete all as per approved design, (sectional weight of only steel members shall be measured for payment). Fixing with 15x3 mm lugs 10 cm long embedded in cement concrete block 15x10x10 cm of C.C. 1:3:6 (1 Cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) Kg 120.000 19418.26 0.00 0
62 DW-74 Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. Fixed to steel windows by welding Kg 110.000 20194.98 0.00 0
63 DW-75 Providing and fixing fly proof galvanized M.S. wire gauge to windows and clerestory windows using wire gauge with average width of aperture 1.4 mm in both directions with wire of dia 0.63 mm all complete. With 12 mm mild steel U beading Sqm 800.000 1541.40 0.00 0
64 SSW-76 Steel work in built up tubular ( round, square or rectanglar hollow tubes etc. ) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete. Hot finished welded type tubes kg 110.000 217403.70 0.00 0
65 SSW-77 Providing and fixing circular/ Hexagonal cast iron or M.S. sheet box for ceiling fan clamp, of internal dia 140 mm, 73 mm height, top lid of 1.5 mm thick M.S. sheet with its top surface hacked for proper bonding, top lid shall be screwed into the cast iron/ M.S. sheet box by means of 3.3 mm dia round headed screws, one lock at the corners. Clamp shall be made of 12 mm dia M.S. bar bent to shape as per standard drawing. Nos. 125.000 858.00 0.00 0
66 SSW-78 Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required. In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works kg 110.000 1417.50 0.00 0
67 SSW-79 Providing and fixing hand rail of approved size by welding etc. to steel ladder railing, balcony railing, staircase railing and similar works, including applying priming coat of approved steel primer. M.S. tube Kg 90.000 59676.33 0.00 0
68 SSW-81 A) 4 mm thick glass panes Sqm 650.000 1119.88 0.00 0
69 SSW-82 B) 5.5 mm thick glass panes Sqm 1000.000 442.49 0.00 0
70 SSW-83 Providing and fixing stainless steel ( Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless steel dash fasteners , stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-in-charge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.). kg 550.000 2423.36 0.00 0
71 SSW-84 Supplying and fixing rolling shutters of approved make, made of requiredsize M.S. laths, interlocked together through their entire length and jointedtogether at the end by end locks, mounted on specially designed pipeshaft with brackets, side guides and arrangements for inside and outsidelocking with push and pull operation complete, including the cost of viding and fixing necessary 27.5 cm long wire springs anufactured from high tensile steel wire of adequate strength conforming to IS: 4454 -part 1 and M.S. top cover of required thickness for rolling shutters. 80x1.25 mm M.S. laths with 1.25 mm thick top cover Sqm 3000.000 150.81 0.00 0
72 TW-85 Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS : 15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), including grouting the joints with white cement and matching pigments etc., complete. Size of Tile 600x600 mm double charged Sqm 1300.000 10002.81 0.00 0
73 TW-86 Providing and laying Vitrified tiles in different sizes (thickness to be specifiedby manufacturer), with water absorption less than 0.08 % and conforming to I.S. 15622, of approved make, in all colours & shade, in skirting, riser of steps, over 12 mm thick bed of cement mortar 1:3 (1 cement: 3 coarse sand), including grouting the joint with white cement & matching pigments etc. complete. Size of Tile 600x600 mm double charged Sqm 1500.000 1665.51 0.00 0
74 TW-87 Providing and laying rectified Glazed Ceramic floor tiles of size 300x300 mm or more (thickness to be specified by the manufacturer), of 1st quality conforming to IS : 15622, of approved make, in colours White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick cement mortar 1:4 (1 Cement: 4 Coarse sand), including grouting the joints with white cement and matching pigments etc., complete. anti-skid Sqm 800.000 1195.91 0.00 0
75 TW-88 Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make,in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete. minimum size 300X450 mm Sqm 1000.000 5666.19 0.00 0
76 TW-89 25 mm wooden planking, tongued and grooved in flooring, including fixing with iron screws complete with : Second class teak wood Sqm 4000.000 66.00 0.00 0
77 KGW-90 Providing and laying 100 mm thick cement concrete flooring all works upto plinth level with M20 grade complete as per direction of Enginner-In-Charge. cum 9000.000 358.80 0.00 0
78 KGW-91 Cement plaster skirting up to 30 cm height, with cement mortar 1:3 (1 cement : 3 coarse sand), finished with a floating coat of neat cement. 18 mm thick Sqm 300.000 223.52 0.00 0
79 KGW-92 Proving & Laying 125 micron thick polyvinyle chloride Sheet under cement Concrete flooring complete as per direction of Enginner-In-Charge. Sqm 30.000 3411.96 0.00 0
80 KGW-94 A) Raj Nagar Plain white marble/ Udaipur green marble/ Zebra black marble. Area of slab over 0.50 sqm Sqm 2000.000 2212.34 0.00 0
81 KGW-95 B) Granite of approve colour. Area of slab over 0.50 sqm Sqm 4000.000 221.13 0.00 0
82 KGW-96 Rough/ smooth top surface of concrete finishing with screed board vibrator, vacuum dewatering process and finally finished by floating, brooming wire brush etc. Complete as per specifications and directios for engineer in charge Sqm 250.000 3429.55 0.00 0
83 KGW-97 Operational charges for grooves cutting by groove cutting machine & filling sealing compound material (polysulphide sealant with two component, make sika or equivalent) in grooves including cost of material compound. The measurement for groov shall be measured as per cm depth and per half cm width for each groov. Rm 100.000 3086.61 0.00 0
84 KGW-98 Kota stone slab flooring over 20 mm (average) thick base laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab, including rubbing and polishing complete with base of cement mortar 1 : 4 (1 cement : 4 coarse sand) : 25 mm thick Sqm 1150.000 3461.76 0.00 0
85 KGW-99 Kota stone slabs 20 mm thick in risers of steps, skirting, dado and pillars laid on 12 mm (average) thick cement mortar 1:3 (1 cement: 3 coarse sand) and jointed with grey cement slurry mixed with pigment to match the shade of the slabs, including rubbing and polishing complete. Sqm 1250.000 346.55 0.00 0
86 KGW-100 Extra for pre finished nosing in treads of steps of Kota stone/ sand stone slab. Rm 80.000 1297.20 0.00 0
87 KGW-101 Providing edge moulding to 18 mm thick granite stone counters, Vanities etc., including machine polishing to edge to give high gloss finish etc. complete as per design approved by Engineer-in-Charge. Rm 250.000 202.66 0.00 0
88 KGW-102 Extra for providing opening of required size & shape for wash basin/ kitchen sink in kitchen platform, vanity counter and similar location in marble/ Granite/stone work, including necessary holes for pillar taps etc. including moulding, rubbing and polishing of cut edges etc. complete. Nos 425.000 296.00 0.00 0
89 KGW-103 Providing and fixing expansion hold fasteners on C.C. /R.C.C./Brick masonry surface backing including drilling necessary holes and the cost of bolt etc complete. Wedge expension type Fastener with threaded dia 10 mm Nos 100.000 20.00 0.00 0
90 TT-106 (iv) IVth course of 400 micron thick PVC sheet. (Overlaps at joints of PVC sheet should be 100 mm wide and pasted to each other with bitumen @ 1.7 kg/sqm). Sqm 500.000 1328.00 0.00 0
91 TT-107 Providing and Placing in position suitable PVC water stops conforming to IS : 12200 for construction / expansion joints between two RCC members and fixed to the reinforcement with binding wire before pouring concrete etc. complete:Dumb bell with central bulb (180 mm wide, 8 mm thick) Rm 200.000 143.52 0.00 0
92 TT-111 e) The whole terrace so finished shall be flooded with water for a minimum period of two weeks for curing and for final test. All above operations to be done in order and as directed and specified by the Engineerin-Charge : With average thickness of 120 mm and minimum thickness at khurra as 65 mm. Sqm 1000.000 4408.52 0.00 0
93 TT-112 Providing gola 75x75 mm in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 stone aggregate 10 mm and down gauge), including finishing with cement mortar 1:3 (1 cement : 3 fine sand) as per standard design : 12.21.1 In 75x75 mm deep chase Rm 150.000 1904.25 0.00 0
94 TT-113 Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, (i) Single socketed pipes. 110 mm diameter Rm 225.000 1481.00 0.00 0
95 TT-115 A) 110 mm bend 87.5 ̊ Nos 110.000 191.00 0.00 0
96 TT-116 B) 110 mm Shoe (plain) Nos 90.000 191.00 0.00 0
97 TT-117 Making khurras 45x45 cm with average minimum thickness of 5 cm cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate of 20 mm nominal size) over P.V.C. sheet 1 m x1 m x 400 micron, finished with 12 mm cement plaster 1:3 (1 cement : 3 coarse sand) and a coat of neat cement, rounding the edges and making and finishing the outlet complete. Nos 200.000 191.00 0.00 0
98 TT-118 Providing and fixing unplasticised -PVC pipe clips of approved design to unplasticised - PVC rain water pipes by means of 50x50x50 mm hard wood plugs, screwed with M.S. screws of required length, including cutting brick work and fixing in cement mortar 1:4 (1 cement : 4 coarse sand) and making good the wall etc. complete. 110 mm Nos 175.000 894.00 0.00 0
99 TT-120 3. Third layer - 3rd layers of roofing membrane APP modified Polymeric membrane minimum 1.5 mm thick of 2.25 Kg/sqm weight consisting of five layers prefabricated with centre core as 20 micron HMHDPE film sandwiched on both sides with polymeric mix and the polymeric mix is protected on both side with 20 micron HMHDPE film. Membrane shall be torched. 4. Fourth layer- 4th layers of Timberline HD roofing shingles with zink coated machine screws with washer (minimum 15mm depth) including rowel plug @ 200 mm centre to centre. The work shall be completed as per direction of Engineer-incharge complete in all respect. The cost of grading of roof by cement mortar 1:4 (1 cement and 4 coarse sand) shall be paid for separetely. The Length and breadth shall be measured correct to a centimeter. Area shall be worked out in squirementer correct to two places of decimal. The superficial area of roof covering shall be measured on the flat without allowance for laps. No additions payment shall be made for laps.The rate shall include the cost of all the materials and labour, T&P involved in all the operations discribed above. Sqm 1900.000 6658.54 0.00 0
100 TT-121 Grading roof for water proofing treatment with Cement mortar 1:4 (1cement : 4 coarse sand) Cum 8000.000 240.83 0.00 0
101 TT-122 Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm (+ 0.05 %) total coated thickness with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineerin-charge. The sheet shall be fixed using self drilling / self tapping screws of size (5.5x 55 mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. Sqm 650.000 696.00 0.00 0
102 TT-124 A) Ridges plain (500 - 600mm) Rm 400.000 158.00 0.00 0
103 TT-125 Providing and fixing 15 cm wide, 45 cm overall semi-circular plain G.S.sheet gutter with iron brackets 40x3mm size, bolts, nuts and washers etc., including making necessary connections with rain water pipes complete. 0.80 mm thick with zinc coating not less than 275 gm/m² Rm 600.000 589.32 0.00 0
104 TT-127 3. Third layer - 3rd layers of roofing membrane APP modified Polymeric membrane minimum 2.0 mm thick of 3.00 Kg/sqm weight consisting of five layers prefabricated with centre core as 100 micron HMHDPE film sandwiched on both sides with polymeric mix and the polymeric mix is protected on both side with 20 micron HMHDPE film. Membrane shall be torched. 4. Fourth layer- 4th layers of Timberline HD roofing shingles with zink coated machine screws with washer (minimum 15mm depth) @ 200 mm centre to centre. The work shall be completed as per direction of Engineer-incharge complete in all respect. The cost of cement bonded partical board shall be paid for separetely. The Length and breadth shall be measured correct to a centimeter. Area shall be worked out in squirementer correct to two places of decimal. The superficial area of roof covering shall be measured on the flat without allowance for laps. No additions payment shall be made for laps.The rate shall include the cost of all the materials and labour, T&P involved in all the operations discribed above. Sqm 2200.000 4256.77 0.00 0
105 TT-128 Providing and laying Standard Seal-A-Ridge, Ridge Cap shingles of required colour on the sloping roof as per specifications complete in all respect with self-adhesive strip and Zinc coated roofing machine screws with washers (minimum 15 mm depth) with rowel plug if require. Other properties/specifications of the Ridge cap shingles shall be same as shingles using as a roofing material. Rm 500.000 1038.50 0.00 0
106 TT-129 Providing and laying cement bonded particle board (Bison Panel) of minimum size 2440 mm x 1220 mm x 20 mm on the sloping truss roof over the purlins support as per specifications complete in all respect. The cost of truss and purlins work shall be paid seperately. The bison panel should confirms to IS-14276 -1995 and should have following technical specifications. Density- 1250 ± 10% KGs/m3 (1100 KGs minimum as per BIS) Moisture content- 9% ± 3% at Factory Point. Modules of Elasticity (bending) - 3000 N/mm2 Bending strength - 9 N/mm2 Transverse tensile strength - 0.4 N/mm2 Compressive strength - 15 N/mm2 Surface Alkalinity pH - between 11 and 13. Nail holding power - 205 Kgs Screw holding power - 312 Kgs The work shall be completed as per direction of engineer in charge. Sqm 1550.000 4256.78 0.00 0
107 TT-133 a) 12.5 mm thick fully Perforated Gypsum Board tile made from plasterboard having glass fibre conforming to IS: 2095 part I, of size 595x595 mm, having perforation of 9.7x9.7 mm at 19.4 mm c/c with center borders of 48 mm and the side borders of 30 mm, backed with non woven tissue on the back side, having an NRC ( Noise Reduction Coefficient) of 0.79, with 50 mm resin bonded glass wool backing. Sqm 3000.000 57.91 0.00 0
108 PIE-134 12 mm cement plaster of mix : 1:6 (1 cement: 6 fine sand) Sqm 220.000 45614.51 0.00 0
109 PIE-135 6 mm thick cement plaster in C.M. 1:3 (1 cement: 3 fine sand) Sqm 180.000 18525.43 0.00 0
110 PIE-136 Providing and laying fiber glass cloth under plaster complete in all respect as per engineer in Charge. Sqm 170.000 763.94 0.00 0
111 PIE-137 Add for plaster drip course/ groove in plastered surface or moulding to R.C.C. projections. Rm 30.000 1201.52 0.00 0
112 FPW-138 Finishing walls with appex exterior paint of required shade : New work (Two or more coats applied @ 3.28 ltr/10 sqm) over and including priming coat of exterior primer applied @ 2.20kg/10 sqm Sqm 220.000 3578.20 0.00 0
113 FPW-139 Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade : New work (two or more coats) over and including water tinnable priming coat with cement primer Sqm 120.000 62437.28 0.00 0
114 FPW-140 Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade : Two or more coats on new work over an under coat of suitable shade with ordinary paint of approved brand and manufacture Sqm 140.000 17276.51 0.00 0
115 FPW-141 Providing and applying plaster of paris putty of 2 mm thickness over plastered surface to prepare the surface even and smooth complete. Sqm 120.000 61520.90 0.00 0
116 PIE-142 Washed stone grit plaster on exterior walls height upto 10 metre above ground level, in two layers, under layer 12 mm cement plaster 1:4 (1 cement : 4 coarse sand ), furrowing the under layer with scratching tool, applying cement slurry on the under layer @ 2 Kg of cement per square metre, top layer 15 mm cement plaster 1:1/ 2:2 (1 cement: 1/2 coarse sand : 2 stone chipping 10 mm nominal size), in panels with groove all around as per approved pattern, including scrubbing and washing the top layer with brushes and water to expose the stone chippings ,complete as per specification and direction of Engineer-in- charge (payment for provoding grooves shall be made separately). Sqm 540.000 23266.09 0.00 0
117 FPW-143 Providing and applying Water Repelling Coating on external surface of stone grit wash and the paint shall be inorganic, alkali resistant, absolutely lightfast oxide pigments, TiO2 free. The application of coats shall depend upon of the absorbency and structure of substrate and allowing sufficient time to dry etc, External surface flat paint (ref SKK cat. CompoSilicon W55 shade or approved equivalent) an acrylic-silicon environment-friendly water-borne reactive curing type high performance water-repellent, breathable, low absorbent with antialgae, anti-fungal & salt resistant properties with application method of surface preparation. complete in all respect as per the direction of Engineer-in-Charge. Make-Sika, Pedelight, "Mermoseal-Plus & Mermoseal-W" MYK schombury, SKK, or equivalent. Sqm 450.000 23266.10 0.00 0
118 PIE-144 Extra for washed grit plaster on exterior walls of height more than 10 m from ground level for every additional height of 3 m or part thereof Sqm 90.000 1989.64 0.00 0
119 PIE-145 Extra for washed stone grit plaster on circular work not exceeding 6 m in radius (in two coats). Sqm 60.000 483.01 0.00 0
120 PIE-146 Forming groove of uniform size from 12x12 mm and upto 25x15 mm in the top layer of washed stone grit plastered surface as per approved pattern, including providing and fixing aluminum channels of appropriate size and thickness (not less than 2 mm), nailed to the under layer with rust proof screws and nails and finishing the groove complete as per specifications and direction of the Engineerin-Charge. Rm 80.000 127963.51 0.00 0
121 PIE-147 Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. Sqm 120.000 3557.36 0.00 0
122 IPS-148 Providing and fixing water closet squatting pan (Indian type W.C. pan ) with 100 mm sand cast Iron P or S trap, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required: White Vitreous china Orissa pattern W.C. pan of size 580x440 mm with integral type foot rests Nos 3500.000 28.00 0.00 0
123 IPS-149 Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require: White Vitreous China Wash basin size 630x450 mm with a pair of 15 mm C.P. brass pillar taps Nos 2300.000 314.00 0.00 0
124 IPS-150 Providing and fixing white vitreous china pedestal type water closet (European type) with seat and lid, 10 litre low level white vitreous china flushing cistern & C.P. flush bend with fittings & C.I.brackets, 40 mm flush bend, overflow arrangement with specials of standard make and mosquito proof coupling of approved municipal design complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required : W.C. pan with ISI marked white solid plastic seat and lid Nos 4500.000 273.00 0.00 0
125 IPS-151 Providing and fixing 600x450 mm bevelled edge mirror of superior glass complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete. Nos 1500.000 16.00 0.00 0
126 IPS-152 Providing and fixing mirror of superior glass (of approved quality) and of required shape and size with plastic moulded frame of approved make and shade with 6 mm thick hard board backing : Rectangular shape 1500x450 mm Nos 2000.000 322.00 0.00 0
127 IPS-153 Providing and laying 110 mm dia UPVC soil waste pipe with pressure 6kg/CM2 for sewer. Rm 900.000 4217.95 0.00 0
128 IPS-154 Providing and fixing PTMT towel rail complete with brackets fixed to wooden cleats with CP brass screws with concealed fittings arrangement of approved quality and colour. 450 mm long towel rail with total length of 495 mm, 78 mm wide and effective height of 88 mm, weighing not less than 170 gms Nos 350.000 112.00 0.00 0
129 IPS-155 Providing and fixing PTMT towel rail complete with brackets fixed to wooden cleats with CP brass screws with concealed fittings arrangement of approved quality and colour. 600 mm long towel rail with total length of 645 mm, width 78 mm and effective height of 88 mm, weighing not less than 190 gms Nos 400.000 250.00 0.00 0
130 IPS-156 Providing and fixingSWR UPVC Nahani Trap 110 mm dia complete all as per direction of Engineer-in-charge. Nos 350.000 570.00 0.00 0
131 IPS-157 Providing and fixing PTMT soap Dish Holder having length of 138mm, breadth 102mm, height of 75mm with concealed fitting arrangements, weighing not less than 106 gms. Nos 100.000 362.00 0.00 0
132 IPS-158 Providing and fixing unplasticised -PVC pipe clips of approved design to unplasticised - PVC rain water pipes by means of 50x50x50 mm hard wood plugs, screwed with M.S. screws of required length, including cutting brick work and fixing in cement mortar 1:4 (1 cement : 4 coarse sand) and making good the wall etc. complete. 110mm Nos 170.000 793.00 0.00 0
133 IPS-159 Providing & Fixing SWR Upvc terminal guard 100 mm dia complete as per direction of Engineer-in-charge. Nos 300.000 153.00 0.00 0
134 IPS-160 Providing and fixing unplasticised P.V.C. connection pipe with PTMT Nuts, collar and bush of approved quality and colour. 15 mm nominal bore with 45 cm length Nos 65.000 1244.00 0.00 0
135 IPS-161 Providing and fixing SWR bend conforming to IS : 14735,including joint with Solvent complete as per direction of Engineer -in- Charge 110 mm dia bend (SWR Bend). Nos 110.000 183.00 0.00 0
136 IPS-162 Proving & fixing SWR Upvc door bend 100 mm dia as per direction of Engineer-in-charge. Nos 350.000 203.00 0.00 0
137 IPS-163 Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete. Flexible pipe :32 mm dia Nos 70.000 465.00 0.00 0
138 IPS-164 Providing and fixing on SWR Tee conforming to 14735, including jointing with solvent proper complete of work as per direction of Engineer incharge. SWR Tee. 110x110x110 mm Nos 350.000 248.00 0.00 0
139 IPS-165 Proving & fixing white vitreous china pedestal for wash basin completely recessed at the back for the reception of pipes and fittings. Nos 1000.000 45.00 0.00 0
140 IPS-166 Providing and fixing white vitreous china flat back half stall urinal of size 580x380x350 mm with white PVC automatic flushing cistern, with fittings, standard size C.P. brass flush pipe, spreaders with unions and clamps (all in C.P. brass) with waste fitting as per IS : 2556, C.I. trap with outlet grating and other couplings in C.P. brass, including painting of fittings and cutting and making good the walls and floors wherever required : Range of two half stall urinals with 5 litre P.V.C. automatic flushing cistern Nos 9200.000 37.00 0.00 0
141 IPS-167 Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per IS: 13983 with C.I. brackets and stainless steel plug 40 mm, including painting of fittings and brackets, cutting and making good the walls wherever required : Kitchen sink with drain board :510x1040 mm bowl depth 250 mm Nos 4100.000 184.00 0.00 0
142 IPS-168 Providing and fixing toilet paper holder : C.P. brass Nos 380.000 39.00 0.00 0
143 IPS-169 Providing and fixing stone slab with table rubbed, edges rounded and polished, of size 75x50 cm deep and 1.8 cm thick, fixed in urinal partitions by cutting a chase of appropriate width with chase cutter and embedding the stone in the chase with epoxy grout or with cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 6 mm nominal size) as per direction of Engineer-in-charge and finished smooth. Granite Stone of approved shade sqm 2800.000 27.38 0.00 0
144 IPS-170 Providing and fixing 8 mm dia C P/ S S jet with flexible tube upto 1m long with S S triangular plate to Eureopean types W C of quality and make as approved by engineer in charge. Nos 250.000 201.00 0.00 0
145 IPS-172 A) 15 mm nominal outer dia Pipes Rm 240.000 2955.72 0.00 0
146 IPS-173 B) 20 mm nominal outer dia Pipes Rm 280.000 469.82 0.00 0
147 IPS-175 a) 20mm nominal bore Rm 220.000 1698.10 0.00 0
148 IPS-176 b) 25 mm nominal bore Rm 240.000 1340.20 0.00 0
149 IPS-177 Providing and fixing G.I. pipes complete with G.I. fittings including trenching and refilling etc. 40 mm dia nominal bore Rm 290.000 1604.00 0.00 0
150 IPS-178 Providing and fixing C.P. brass bib cock of approved quality conforming to IS:8931 : 15 mm nominal bore Nos 650.000 184.00 0.00 0
151 IPS-179 Providing and fixing C.P. brass long nose bib cock of approved quality conforming to IS standards and weighing not less than 810 gms. 15 mm nominal bore Nos 750.000 395.00 0.00 0
152 IPS-180 Providing and fixing C.P. brass stop cock (concealed) of standard design and of approved make conforming to IS:8931. 15 mm nominal bore Nos 750.000 177.00 0.00 0
153 IPS-182 A) 20mm nominal bore Nos 390.000 156.00 0.00 0
154 IPS-183 B) 25 mm nominal bore Nos 420.000 141.00 0.00 0
155 IPS-184 C) 40 mm nominal bore Nos 570.000 68.00 0.00 0
156 IPS-185 Providing and fixing PTMT grating of approved quality and colour. Cirlular type 100 mm nominal dia Nos 30.000 492.00 0.00 0
157 IPS-186 Providing and placing on terrace (at all floor levels) polyethylene water storage tank, ISI : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank. circular tank. Litre 11.000 170000.00 0.00 0
158 IPS-187 Providing and fixing ball valve (brass) of approved quality, High or low pressure, with plastic floats complete : 20 mm nominal bore Nos 320.000 274.00 0.00 0
159 IPS-188 Providing and fixing brass ferrule with C.I. mouth cover including boring and tapping the main : 25 mm nominal bore Nos 350.000 274.00 0.00 0
160 IPS-189 Providing and fixing C.P. brass long body bib cock of approved quality conforming to IS standards and weighing not less than 690 gms. 15 mm nominal bore Nos 750.000 616.00 0.00 0
161 IPS-190 Providing and fixing C.P. brass angle valve for basin mixer and geyser points of approved quality conforming to IS:8931 a) 15 mm nominal bore 15mm nominal bore Nos 700.000 1556.00 0.00 0
162 IPS-191 Providing and fixing C.P. brass shower rose with 15 or 20 mm inlet : 100 mm diameter Nos 80.000 273.00 0.00 0
163 EPS-192 Providing and fixing upvc pipe 160 mm dia class-B (SWR drainage system) including all fittings clamps solvent cement, cutting wall & making good the same including testing of joints complete all as specified. with pressure 6kg/CM2 for sewer line. Rm 1200.000 1616.00 0.00 0
164 EPS-193 Providing and laying cement concrete 1:5:10 (1 cement : 5 coarse sand : 10 graded stone aggregate 40 mm nominal size) all-round S.W. pipes 160 mm including bed concrete as per standard design : 150mm diameter S.W. pipe Rm 750.000 1616.00 0.00 0
165 EPS-194 Providing and fixing square-mouth S.W. gully trap class SP-1 complete with C.I. grating brick masonry chamber with water tight C.I. cover with frame o f 300 x300 mm size (inside) the weight of cover to be not less than 4.50 kg and frame to be not less than 2.70 kg as per standard design: 100x100 mm size P type : With common burnt clay F.P.S. (non modular) bricks of class designation 7.5. Nos 1550.000 155.00 0.00 0
166 EPS-195 Constructing brick masonry manhole in cement mortar 1:4 ( 1 cement : 4 coarse sand ) with R.C.C. top slab with 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size), foundation concrete1:4:8 mix (1 cement : 4 coarse sand : 8 graded stone aggregate 40 mmnominal size), inside plastering 12 mm thick with cement mortar 1:3 (1cement : 3 coarse sand) finished with floating coat of neat cement and making channels in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) finished with a floating coat of neat cement complete as per standard design : Inside size 90x80 cm and 45 cm deep including C.I. cover with frame (light duty) 455x610 mm internal dimensions, total weight of cover and frame to be not less than 38 kg (weight of cover 23 kg and weight of frame 15 kg) : : With common burnt clay F.P.S. (non modular) bricks of class designation 7.5 each 8500.000 358.00 0.00 0
167 EPS-196 Extra for depth for manholes : Size 90x80 cm : With Common burnt clay F.P.S (non modular) bricks of class designation 7.5. Rm 8500.000 114.75 0.00 0
168 EPS-197 Making plinth protection 50 mm thick of cement concrete 1:3:6 (1 cement: 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) over 75mm thick bed of dry brick ballast 40 mm nominal size, well rammed and consolidated and grouted with fine sand, including finishing the top smooth. Sqm 450.000 2961.77 0.00 0
169 EPS-198 Brick edging 7cm wide 11.4 cm deep to plinth protection with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 including grouting with cement mortar 1:4 (1 cement : 4 fine sand). Rm 40.000 2961.77 0.00 0
170 EPS-199 core cutting dia 125mm depth 100-300mm all as specified and as per direction of Engineer-in-charge. nos. 1800.000 253.00 0.00 0
171 EPS-200 Providing and fixing 6 mm thick tharmacol sheet between RCC and brick work junction point with the help of shoe nails to avoid thermal expansion as per direction of engineer in charge sqm 100.000 887.40 0.00 0
172 EPS-201 Drilling hole (16 mm to 32 mm) with Hilti and fixing (12 mm to 25 mm) Bar with Hilti HY - 150. The depth of hole shall be as per design and shall be filled up by appoxy chemical/ recommended chemical as per requirment. Complete in all respect i/c all T & P as per direction of engineer in charge. (steel bar shall be measured and paid seperately). Nos 750.000 2958.00 0.00 0
173 IPS-203 1 -Chapati rolling table (60x30x34”) 1 no 2-Chapati plate with puffer (60x30x34”) 1 no 3-Chapati collection table (24x30x34”)1 no 4-Exhaust hood with filters (72x50x22”) 1 no 5-Low height burner (24x24x24”) 6 no 6-Exhaust hood with filter (90x30x22”) 2 no 7- Bulk Cooker 120 litr 2 no, 8- Hot Case (24x30x60”) 3 no 9- Table for vegetable cutting machine (44x24x34”) 01 no 10-Vegetable cutting machine (CL 50) 01 no 11- Two sink unit (42x24x34”) 01 no 12- Table for meat mincer (44x24x34”) 01 no , 13- Meat mincer (Sirman) (TCB VEGAS ) 01 no 14-Dough kneador (25 kgs) 01 no ,15-Potato peeler(20 kgs) 01 no 16-Dish landing table (44x24x34”) 01 no , 17-Utensils rack (5 tier) ( 44x20x60”) 01 no 18-Pot rack (3 tier) (48x24x60” ) 01 no , 19-Bussing trolley (2 tier) (36x24x34”) 01 no 20- Storage rack (5 tier) (36x20x60”) 03 no, 21-Storage rack (5 tier) ( 44x20x60”) 02 no 22- Lockable almirah (4 tier) (44x20x60”) 01 no, 23- SS Pallet (72x24x10”) 01 no 24- Onion bin (36x24x36”) 01 no, 25- Potato bin (36x24x36”) 01 no 26- Gas pipeline with manifold etc. 01 no, 27- Exhaust fan 18"" 03 no 28-G I Ducting (In square feet) 600 no, 29- Water cooler with commercial RO (50 + 25 LPH) 01 no 30-Work table ( 60x24x34” ) 2 no, 31-Four door refrigerator (50x30x84” ) 1 no , 32-Three sink unit (72x24x34+6”) 1 no, 33-Plate rack ( 72x14x18”) 1 no , 34-Deep freezer (343 litr)1 no 35-Pulveriser (3 HP) 1 no, 26-Bussing trolley (2 tier) 1 no, 27-Gas pipeline with manifold etc. 1no 28-Exhaust fan 2 no, 29-G I Ducting (In square feet) 144 no job 2200000.000 1.00 0.00 0
174 IPS-205 1 -Chapati rolling table 1 no (36x27x34”) 2-Chapati plate with puffer 1 no (39x27x34”) 3-Chapati collection table 1 no (24x27x34”) 4-Exhaust hood with filters 1 no (54x50x22”) 5-Low height burner 1 no (24x24x24”) 6-Exhaust hood with filter 1 no (30x30x22”) 7-Two burner range1 no (48x24x34”) 8-Exhaust hood with filter 1 no (54x30x22”) 9-Work table 1 no (44x24x34”) 10-Multipurpose table 1 no (44x30x34”) 11-Four door refrigerator 1 no (50x30x84”) 12-Work table 1 no (72x24x34”) 13-Toaster (Wall mounted) 1 no (12 Toast) 14-Three sink unit 1 no (66x24x34+6”), 15-Plate rack 1 no (66x14x18”) 16-Dish landing table 1 no (44x24x34”), 17-Utensils rack (5 tier) 1 no (44x20x60”) 18-Deep freezer (232 litr)1 no , 19-Table with sink 1 no ( 60x24x34”) 20-Pulveriser 1 no (3 HP), 21-Water cooler with commercial RO 1 no (50 + 25 LPH) 22-Pot rack (3 tier), 1 no (48x24x60”), 23-Utensils rack (5 tier), 3 no (44x20x60”) 24-Vegetable rack (5 tier), 2 no (44x20x60”), 25-Onion cum potato bin, 1 no (36x24x34”) 26-Bussing trolley (2 tier) 1 no (36x24x34”), 27-Gas pipeline with manifold etc,1no (Standard) 28-Exhaust fan, 2 no (18”), 29-G I Ducting (In square feet) 144 no job 1025000.000 1.00 0.00 0
175 IPS-207 1 -Chapati rolling table (44x27x34”) 1 no 2-Chapati plate with puffer (39x27x34”) 1 no 3- Three burner range (66x24x34”) 01 no 4-Exhaust hood with filters (126x30x22”) 1 no 5- Table with sink ( 66x24x34”) 6- Under counter refrigerator(60x27x34”) 7- Table for cutting chopping (60x24x34”) 8- Toaster (Wall mounted) 12 toast , 01 no 9- Crockery/cutlery rack (5 tier) (44x20x60”) 01 no 10-Pantry table (60x24x34”) 01 no 11- Coffee machine( 50 cups) 01 no 12- Cornflakes dispenser(3 Liters) 01 no 13-Lockable pantry table (44x24x34”) 01 no 14- Plate rack (66x14x18”) 01 no 15-Dish landing table (44x24x34”) 01 no 16-20- Storage rack (5 tier) (36x20x60”) 01 no 17- Pulveriser (3HP) 01 no 18-Bussing trolley (2 tier) (36x24x34”) 01 no 19- Two sink unit (48x24x34”) 01 no 20-Utensils rack (5 tier) ( 44x20x60”) 01 no 21- Storage rack (5 tier) (44x20x60”) 01 no 22-Storage rack (5 tier) ( 54x20x60”) 01 no 23- Gas pipeline with manifold etc. 01 no 24- Exhaust fan 18"" 02 no 25-G I Ducting (In square feet) 240 no 26- Water cooler with commercial RO (50 + 25 LPH) 01 no job 810000.000 1.00 0.00 0
176 DL-209 layout/ demarcation of master plan (proposed buildings, roads and other infrastructures) on ground by total station machine i/c all required T & P for proposed campus, including cost of surveyor and helper but excluding material and labour for providing and fixing demarcation pillars etc. The work shall be completed as per direction and satisfaction of engineer in-charge. The main road network area shall be measured for the payment. Sqm 5.000 16905.04 10803.52 63.91
177 DL-210 Providing & fixing of Cement Concrete Demarcation piller of size (125mmx125mmx600mm) in 1:2:4 cement, sand coarse aggregate having one bar of 8mm dia reinforcement including clearing grass and removal of the rubbies around the location of pillar, necessary earth work in excavation, P/L P.C.C 1:3:6 size (0.30mx0.30mx0.30m) for pillar base & side, white washing of the pillar above on the ground leve, lsupply of all material, labour and T & P etc. required for proper completion of the work as per direction of engineer in charge. Nos. 450.000 100.00 0.00 0
178 DL-211 Clearing jungle including uprooting of rank vegetation, grass, brush wood, trees and saplings of girth upto 30 cm measured at a height of 1m above ground level and removal of rubbish upto a distance of 50 m outside the periphery of the area cleared Sqm 5.000 50000.00 50000.00 100
179 DL-212 Clearing grass and removal of the rubbish upto a distance of 50 m outside the periphery of the area cleared. Sqm 3.000 50000.00 7503.30 15.01
180 RRW-213 Random rubble masonry (Retaining wall) with hard stone in foundation and superstructure with cement concrete 1:6:12 (1 cement : 6 coarse sand : 12 graded stone aggregate 20 mm nominal size) upto plinth level with :Cement mortar 1:6 (1 cement : 6 coarse sand) Cum 5500.000 1209.26 0.00 0
181 RRW-214 Pointing on stone work with cement mortar 1:3 (1 cement : 3 fine sand) : Flush/ Ruled pointing Sqm 150.000 1719.32 0.00 0
182 EW-215 Excavation in Soil using Hydraulic Excavator and Tippers with disposal upto 1000 m: Excavation in soil with hydraulic excavator of 0.9 cum bucket capacity including cutting and loading in tippers, trimming bottom and side slopes, in accordance with requirements of lines, grades and cross-sections, and transporting to the embankment location with a lift upto 1.5 m and lead upto 1000 m as per Technical Specification Clause 302.3. Cum 125.000 68694.88 3656.37 5.32
183 EW-216 Excavation in Soil with Dozer with lead upto 100 m Excavation for roadway in soil by mechanical means including cutting and pushing the earth to site of embankment upto a distance of 100 m, including trimming bottom and side slopes in accordance with requirements of lines, grades and cross-sections. Cum 60.000 5071.51 0.00 0
184 EW-217 Filling available excavated earth (excluding rock) in tarrace, in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m. Cum 90.000 51768.76 0.00 0
185 EW-218 Carriage/Transportation of surplus earth by Mechanical Transport Including Loading , Unloading and Stacking (Lead up to 01 km) Cum 100.000 13367.71 0.00 0
186 OTH-219 Providing and Fixing 'Logo' of World Bank ProjectProviding and fixing of typicalworld Bank informatory sign board with Logo as per MORD specifications anddrawing. Three MS Plates of 1.6 mm thick, top and middle plate duly welded with MS flat iron 25mm x 5m size onback on edges. The lower plate will be welded with MS angle iron frame of 25mm x 25mm x 5mm. The angle ironframe of the lower most plate and flat iron frame of middleplate will be welded to 2 nos. 75mm x 75 mm of 12 SWGsheet tubes posts duly embedded in cement concrete M-15grade blocks of 450mm x 450mm x 600mm, 600mmbelow ground level. The top most diamond plate will bewelded to middle plate by 47mm x 47mm of 12 SWG steel plate tube. All M.S. will be stove enameled on both sides.Lettering and printing arrows, border etc. will be painted with ready mixed synthetic enamel paint of superiorquality in required shade and colour. All sections offramed posts and steel tube will be painted with primerand two coats of epoxy paint as per drawing Clause 1701and Annexure 1700.1 Each 12500.000 1.00 0.00 0
187 RW-221 Preparation and consolidation of sub grade with power road roller of 8 to 12 tonne capacity after excavating earth to an average of 22.5 cm depth, dressing to camber and consolidating with road roller including making good the undulations etc. and re-rolling the sub grade and disposal of surplus earth with lead upto 50 metres. sqm 50.000 16905.04 0.00 0
188 RW-223 (a) With material conforming to Grade-I (size range 75 mm to 0.075 mm) having CBR Value-30 cum 3000.000 2614.47 0.00 0
189 RW-224 Providing and laying design mix cement concrete of M-30 grade, in roads/ taxi tracks/ runways, using cement content as per design mix, using coarse sand and graded stone aggregate upto maximum of 40 mm nominal size in appropriate proportions as per approved & specified design criteria, providing dowel bars with sleeve/ tie bars wherever required, laying at site, spreading and compacting mechanically by using needle and surface vibrators, levelling to required slope/ camber, finishing with required texture, including steel form work with sturdy M.S. channel sections, curing, making provision for contraction/ expansion, construction & longitudinal joints ( 10 mm wide x 50 mm deep) by groove cutting machine, providing and filling joints with approved joint filler and sealants, fixing of 125 mm micron thick polythene film, complete all as per direction of Engineerin- charge (Item of joint fillers, sealants, dowel bars with sleeve/ tie bars to be paid separately).Cement content considered in M-30 is @ 340 kg/cum. Excess/less cement used as per design mix is payable/ recoverable separately.Cement concrete manufactured in automatic batching plant (RMC plant) i/c transportation to site in transit mixer. cum 8000.000 3381.01 0.00 0
190 RW-225 Providing and filling in position, bitumen hot sealing compound in expansion joints. (10mm wide 50 mm deep) Rm 20.000 6762.00 0.00 0
191 RW-227 (a) 300 mm dia. R.C.C. pipe Rm 500.000 30.00 0.00 0
192 RW-228 (b) 600 mm dia. R.C.C. pipe Rm 1350.000 15.00 0.00 0
193 RW-229 (c ) 900 mm dia. R.C.C. pipe Rm 2000.000 24.00 0.00 0
194 RW-230 (d) 1200 mm dia. R.C.C. pipe Rm 2700.000 10.00 0.00 0
195 RW-231 Construction of K.C. type Drain as per drawing (drawing attached) of M-20 grade cement concrete precast kerb stone of size 15x40 cm with M-20 cement contrete 50 cm wide and 10cm thick over 7.5 cm cement concrete in proportion 1:4:8 (cement, coarse sand and 40mm thick crushed stone ballast )including earthwork, disposal of surpluse earth complete in all respect & supply of all material labour , T&P etc. required for proper completion of work. Rm 1100.000 2000.00 0.00 0
196 RW-232 Construction of dry lean cement concrete sub base over a prepared sub-grade with coarse and fine aggregate conforming to IS:383, the size of coarse aggregate not exceeding 25 mm, aggregate cement ratio not to exceed 15:1, aggregate gradation after blending to be as per specifications, cement content not to be less than 150 Kg/cum, optimum moisture content to be determined during trial length construction, concrete strength not to be less than 10 Mpa at 7 days, mixed in a batching plant, transported to site, for all leads & lifts, laid with a mechanical paver, compacting with 8-10 tonne vibratory roller, finishing and curing etc. complete as per direction of Engineer-in- charge. cum 4000.000 1690.50 0.00 0
197 RW-233 Road Delineators / Vertical Guide Posts: Supply and fixing of MS delineators 1000 mm long , having a diameter of 75 mm and thickness 4mm and having atleast 3 different colour strips of 75 mm wide Type IV retroreflective tape around the black painted pole attached with 150 mm x 25 mm x 6 mm MS flats welded at bottom to be fixed in M15 concrete base as directed by the Engineer in Charge as per IRC: 79 (Recommended Practice for Road Delineators) and Clause no. 806 of MORTH specifications nos 500.000 60.00 0.00 0
198 RW-234 Providing and laying at or near ground level factory made kerb stone of M- 25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5mm), including making drainage opening wherever required complete etc. as per direction of Engineer-in-charge (length of finished kerb edging shall be measured for payment). (Precast C.C. kerb stone shall be approved by Engineer-in-charge). cum 10000.000 52.90 0.00 0
199 RW-235 Providing and fixing G.I. chain link fabric fencing of required width in mesh size 50x50 mm including strengthening with 2 mm dia wire or nuts, bolts and washers as required omplete as per the direction of Engineer-incharge. Made of G.I. wire of dia 4 mm sqm 2000.000 49.14 0.00 0
200 KGW-237 Cement concrete flooring 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate) finished with a floating coat of neat cement, including cement slurry, but excluding the cost of nosing of steps etc. complete. : 40 mm thick with 20 mm nominal size stone aggregate sqm 350.000 2312.42 0.00 0
201 PIE-238 12 mm cement plaster finished with a floating coat of neat cement of mix : 1:4 (1 cement: 4 fine sand). sqm 200.000 4801.34 0.00 0
202 EPS-239 Providing and fixing factory made precast RCC perforated drain covers, having concrete of strength not less than M-25, of size 1000 x 450x50 mm, reinforced with 8 mm dia four nos longitudinal & 9 nos cross sectional T.M.T. hoop bars,including providing 50 mm dia perforations @ 100 to 125 mm c/c, including providing edge binding with M.S. flats of size 50 mm x 1.6 mm complete, all as per direction of Engineer-in-charge. nos 900.000 7402.00 0.00 0
203 RW-240 Providing and fixing factory made precast RCC perforated drain covers, having concrete of strength not less than M-25, of size 1700 x 450x50 mm, reinforced with 8 mm dia four nos longitudinal & 9 nos cross sectional T.M.T. hoop bars, including providing 50 mm dia perforations @ 100 to 125 mm c/c, including providing edge binding with M.S. flats of size 50 mm x 1.6 mm complete, all as per direction of Engineer-in-charge. nos 1600.000 698.00 0.00 0
204 EPS-243 20 mm dia nominal bore. Rm 180.000 476.00 0.00 0
205 EPS-244 25 mm dia nominal bore. Rm 200.000 363.00 0.00 0
206 EPS-245 32 mm dia nominal bore. Rm 240.000 30.00 0.00 0
207 EPS-246 40 mm dia nominal bore. Rm 300.000 155.00 0.00 0
208 EPS-247 50 mm dia nominal bore. Rm 330.000 776.00 0.00 0
209 EPS-248 65 mm dia nominal bore. Rm 440.000 435.00 0.00 0
210 EPS-249 80 mm dia nominal bore. Rm 560.000 630.00 0.00 0
211 EPS-250 100 mm dia nominal bore. Rm 1100.000 161.00 0.00 0
212 EPS-251 125 mm dia nominal bore. Rm 1400.000 445.00 0.00 0
213 EPS-252 150 mm dia nominal bore. Rm 1600.000 481.00 0.00 0
214 EPS-254 32 mm dia nominal bore. each 500.000 10.00 0.00 0
215 EPS-255 40 mm dia nominal bore. each 650.000 5.00 0.00 0
216 EPS-256 50 mm dia nominal bore. each 730.000 20.00 0.00 0
217 EPS-257 65 mm dia nominal bore. each 1250.000 15.00 0.00 0
218 EPS-258 80 mm dia nominal bore. each 1900.000 20.00 0.00 0
219 EPS-259 100 mm dia nominal bore. each 11000.000 2.00 0.00 0
220 EPS-260 125 mm dia nominal bore. each 17000.000 2.00 0.00 0
221 EPS-261 150 mm dia nominal bore. each 25000.000 2.00 0.00 0
222 EPS-262 Constructing masonry Chamber 30x30x50 cm inside, in brick work in cement mortar 1:4 (1 cement :4 coarse sand) for stop cock, with C. I. surface box 100x100 x75 mm (inside) with hinged cover fixed in cement concrete slab 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size), i/c necessary excavation, foundation concrete 1:5:10 ( 1 cement : 5 fine sand : 10 graded stone aggregate 40mm nominal size ) and inside plastering with cement mortar 1:3 (1 cement : 3 coarse sand) 12mm thick, finished with a floating coat of neat cement complete as per standard design :With common burnt clay F.P.S.(non modular) bricks of class designation 7.5 each 1150.000 112.00 0.00 0
223 EPS-263 Constructing masonry Chamber 60x60x75 cm inside, in brick work in cement mortar 1:4 (1 cement : 4 coarse sand) for sluice valve, with C.I. surface box 100mm top diameter, 160 mm bottom diameter and 180 mm deep ( inside) with chained lid and RCC top slab 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20mm nominal size ) , i/c necessary excavation, foundation concrete 1:5:10 (1 cement : 5 fine sand : 10 graded stone aggregate 40 mm nominal size) and inside plastering with cement mortar 1:3 (1 cement : 3 coarse sand) 12 mm thick, finished with a floating coat of neat cement complete as per standard design : With common burnt clay F.P.S.(non modular) bricks of class designation 7.5 each 6850.000 46.00 0.00 0
224 EPS-264 Providing and fixing brass ferrule with C.I. mouth cover including boring and tapping the main : 20 mm nominal bore each 260.000 25.00 0.00 0
225 EPS-265 Providing and fixing brass ferrule with C.I. mouth cover including boring and tapping the main :25 mm nominal bore continue.. each 350.000 92.00 0.00 0
226 EPS-266 Providing and fixing C.I. sluice valves (with cap) complete with bolts, nuts, rubber insertions etc. (the tail pieces if required will be paid separately) : Class I C.I. sluice valves (with cap) complete :100 mm dia each 3250.000 35.00 0.00 0
227 EPS-267 Providing and fixing C.I. sluice valves (with cap) complete with bolts, nuts, rubber insertions etc. (the tail pieces if required will be paid separately) : Class I C.I. sluice valves (with cap) complete : 125 mm dia each 3500.000 46.00 0.00 0
228 EPS-268 Providing and fixing C.I. sluice valves (with cap) complete with bolts, nuts, rubber insertions etc. (the tail pieces if required will be paid separately) : Class I C.I. sluice valves (with cap) complete : 150 mm dia each 4000.000 3.00 0.00 0
229 EPS-270 20 mm diameter pipe Rm 7.000 476.00 0.00 0
230 EPS-271 25 mm diameter pipe Rm 8.000 363.00 0.00 0
231 EPS-272 32 mm diameter pipe Rm 10.000 30.00 0.00 0
232 EPS-273 40 mm diameter pipe Rm 14.000 155.00 0.00 0
233 EPS-274 50 mm diameter pipe Rm 15.000 776.00 0.00 0
234 EPS-275 65 mm diameter pipe Rm 16.000 435.00 0.00 0
235 EPS-276 80 mm diameter pipe Rm 18.000 630.00 0.00 0
236 EPS-277 100 mm diameter pipe Rm 25.000 161.00 0.00 0
237 EPS-278 125 mm diameter pipe Rm 30.000 445.00 0.00 0
238 EPS-279 150 mm diameter pipe Rm 35.000 481.00 0.00 0
239 EPS-281 20 mm diameter pipe Rm 65.000 476.00 0.00 0
240 EPS-282 25 mm diameter pipe Rm 70.000 363.00 0.00 0
241 EPS-283 32 mm diameter pipe Rm 75.000 30.00 0.00 0
242 EPS-284 40 mm diameter pipe Rm 80.000 155.00 0.00 0
243 EPS-285 50 mm diameter pipe Rm 85.000 776.00 0.00 0
244 EPS-286 65 mm diameter pipe Rm 90.000 435.00 0.00 0
245 EPS-287 80 mm diameter pipe Rm 95.000 630.00 0.00 0
246 EPS-288 100 mm diameter pipe Rm 100.000 161.00 0.00 0
247 EPS-289 125 mm diameter pipe Rm 110.000 445.00 0.00 0
248 EPS-290 150 mm diameter pipe Rm 120.000 481.00 0.00 0
249 EPS-292 20 mm diameter pipe Nos 160.000 7.00 0.00 0
250 EPS-293 25 mm diameter pipe Nos 200.000 15.00 0.00 0
251 EPS-294 32 mm diameter pipe Nos 225.000 25.00 0.00 0
252 EPS-295 40 mm diameter pipe Nos 250.000 25.00 0.00 0
253 EPS-296 50 mm diameter pipe Nos 350.000 25.00 0.00 0
254 EPS-297 65 mm diameter pipe Nos 600.000 30.00 0.00 0
255 EPS-298 80 mm diameter pipe Nos 700.000 26.00 0.00 0
256 EPS-299 100mm diameter pipe Nos 1500.000 30.00 0.00 0
257 EPS-300 125 mm diameter pipe Nos 3500.000 30.00 0.00 0
258 EPS-301 150 mm diameter pipe Nos 5000.000 20.00 0.00 0
259 EPS-318 (o) Filling of earth, ramming and watering the earth upto the plinth level which will be about 0.30m above from natural ground level for constructing floor & apron projecting one meter form the tank columns and drain outside. The apron shall be 25mm PCC 1:2:4 over 80mm thick PCC 1:6:12 at floor of the tank with suitable glass strips with brick masonary walls in 1:6 cement sand mortar required to raise ground level to plinth level including all materials etc. Lit. 35.000 500000.00 0.00 0
260 EPS-319 6 point wiring point for light with 1.0 sq.mm P.V.C insulated multi strand copper conductor cable in heavy gauge rigid P.V.C conduit pipe on surface complete 14 S.W.G copper earth continuously wire piano type switch and ceiling rose / angle /baton holder on 3 mm thick phenol laminated back light sheet etc. complete in all respect as per I.E rule including luminaries with 154 amp. switch fuse unit Pump House Job 10000.000 1.00 0.00 0
261 EPS-321 Carried out of geo hydrological survey of site for searching out the suitability for location of tube well for drinking water purpose for SDRF Campus Jolly grant Dehradun though any reputed/renowned hydrogeologist/any Govt. Institution complete in all respect and provide the documentary report. Job 50000.000 1.00 0.00 0
262 EPS-322 Making trial bore by DTH method of 125 mm dia. In all type of starta up to depth of 210 mtr. Taking out the water and soil sample at every 1 mtr depth after 10mtr below natural ground level. The water sample shall be kept in water container of 1 litre and soil sample shall be kept in poly bag for laboratory testing. With proper demarcation of sampling. All samples shall be tested from any NABL Accredited laboratory. As per laboratory report the strata chart shall be provided by the contractor for installation of main tube well. The rate are including collecting samples from different strata, preparing and submitting strata chart/ bore log, laboratory report, including hire and running changes of all equipment tools ,plants and machinery required for the job, including removal of pipe from bore and T&P from site. All complete as per direction of engineer in- charge. Rm 1000.000 210.00 0.00 0
263 EPS-323 Transportation of Rig Machine, Air compressor O.P unit camp equipages, connected T&P & necessary material required for drilling up to site of work, including loading, unloading etc. complete. job 25000.000 1.00 0.00 0
264 EPS-324 Errection and Leveling of Rig Machine and barricading at site of work job 25000.000 1.00 0.00 0
265 EPS-325 Dismantling of Rig Machine & Clearance of site after satisfactory completion of work. job 25000.000 1.00 0.00 0
266 EPS-326 Drilling of borehole from GL to 210 mtr. BGL Rm 1000.000 210.00 0.00 0
267 EPS-327 Chemical & bacteriological testing of water sample job 10000.000 1.00 0.00 0
268 EPS-328 Pea Gravel packing in tubewell construction in accordance with IS: 4097, including providing gravel fine/ medium/ coarse, in required grading & sizes as per actual requirement, all complete as per direction of Engineerin- charge. cum 1160.000 81.89 0.00 0
269 EPS-330 (a) 300 mm nominal size dia having minimum wall thickness 7.10 mm Rm 2100.000 140.00 0.00 0
270 EPS-332 (a) 300 mm nominal size dia having thickness of 7.10 mm sloted pipe Rm 2500.000 70.00 0.00 0
271 EPS-334 (a) Development of tubewell by 350 PSI/1100 CFM Air compressor. hr 540.000 80.00 0.00 0
272 EPS-335 Development of tubewell by the suitable capacity O.P unit including supply & installation of pumping plant. hr 600.000 60.00 0.00 0
273 EPS-337 300 mm dia - 8mm thick No. 300.000 1.00 0.00 0
274 EPS-339 300 mm clamp No. 1500.000 1.00 0.00 0
275 EPS-341 300 mm dia No. 300.000 1.00 0.00 0
276 EPS-343 Supply of 730 LPM , 160 m Head , 2900 RPM, 50 H.P. Submersible Clear water pumping plant suitable to operate on 380±10% volt 50 Hz, 3 Phase A.C supply (As per IS8034-1989), Set 100000.000 2.00 0.00 0
277 EPS-354 (x)Phase Reversal Unit Job 100000.000 1.00 0.00 0
278 EPS-355 Extra submersible cable for increased column pipe length Mtr. 500.000 33.00 0.00 0
279 EPS-356 Level Controller GSM Based Controller No. 10000.000 1.00 0.00 0
280 EPS-374 (P) Hinge pin stainless steel Job 10000.000 1.00 0.00 0
281 EPS-375 Extra Column Pipe of 3 mtr length Nos 1500.000 3.00 0.00 0
282 EPS-376 Electromagnetic online Flowmeter of 80mm size No. 5000.000 1.00 0.00 0
283 EPS-380 (C) Other necessary fitting for gauges, control cock, Air hand pump steel airline suitable length (1 Job) Job 5000.000 1.00 0.00 0
284 EPS-392 Line tester (Taparia make) (1 No) Job 5000.000 1.00 0.00 0
285 EPS-393 LIFTING TACKLE (REPUTED MAKE) of 2 Ton capacity 4.5m lift, spur geared chain pulley block (Tested on 3 Tonne) No. 10000.000 1.00 0.00 0
286 EPS-394 0-6 LPH Electromechanical type chlorination plant (IS-10553,Part-5 1987) Job 10000.000 1.00 0.00 0
287 EPS-395 Painting of pumping plant with approved anticorrosive and specified colour paint 2 coat Job 10000.000 1.00 0.00 0
288 EPS-396 Miscellaneous item such as Protection Ring, T.W. Cover, Transformer Oil, Electric Resistance Rubber Sheet etc. Job 10000.000 1.00 0.00 0
289 EPS-398 Installation of pumping plant alongwith all necessary fitting including bypass and delivery arrangement, airline & gauges fitting etc. complete in all respect with supply & burying of 600 mm x 600 mm x 6 mm G.I plate vertically for double earthling with its top at least 3m. Below ground level complete with 40mm dia. G.I pipe and funnel for watering and one earthling lead of 25mm x3mm G.I strip in L.S 32 media. G.I pipe up to switch bold 30 sq.cm. C.I frame with hinged cover masonry and salt at least 200mm. thick all a ground etc. complete in all respect as per ISS and Indian electricity rules Job 25000.000 1.00 0.00 0
290 EPS-399 Trial & Testing of pumping plant Job 10000.000 1.00 0.00 0
291 EPS-400 Chemical & bacteriologocal testing of water sample before insttalation of tubewell Job 10000.000 1.00 0.00 0
292 EPS-401 Geohydrological resistivity survey for ascertaining of feasibility of site if required Job 25000.000 1.00 0.00 0
293 EPS-404 a) 0.00 - 1.50 m B.G.L. cum 200.000 3547.97 0.00 0
294 EPS-405 b) 1.50 - 3.00 m B.G.L cum 275.000 684.39 0.00 0
295 EPS-406 c) 3.00 - 4.50 m B.G.L cum 325.000 337.36 0.00 0
296 EPS-408 a) Depth upto 3.0 m BGL sqm 800.000 696.00 0.00 0
297 EPS-409 b) Depth 3.0m to 6.0 m BGL sqm 1000.000 187.42 0.00 0
298 EPS-411 a) Depth upto 3.0 m BGL sqm 550.000 2357.96 0.00 0
299 EPS-413 (a) 200mm Dia b) 1.50 - 3.00 m B.G.L RM 800.000 450.00 0.00 0
300 EPS-414 (b ) 200mm Dia c) 3.00 - 4.50 m B.G.L RM 900.000 132.00 0.00 0
301 EPS-415 (c) 150mm Dia a) 0.00 - 1.50 m B.G.L. RM 700.000 1337.00 0.00 0
302 EPS-416 (d) 150mm Dia b) 1.50 - 3.00 m B.G.L RM 725.000 1003.00 0.00 0
303 EPS-417 (e) 150mm Dia c) 3.00 - 4.50 m B.G.L RM 750.000 100.00 0.00 0
304 EPS-419 (a) 900mm internal diameter at bottom,0.90-1.65m depths Nos 15000.000 142.00 0.00 0
305 EPS-420 (b) 1200 mm internal diameter at bottom ,1.65-2.30m depths Nos. 22500.000 55.00 0.00 0
306 EPS-421 ( c) 1500 mm internal diameter at bottom ,2.30m-4.95 m depths Nos. 80000.000 16.00 0.00 0
307 EPS-422 Providing granular bedding with cerefully compacted backfill at all level using graded hard crusher broken stone100% passing through 20mm sieve , 20-50% passing through 10mm sieve and 100% retained on 6mm sieve, laying in layers of not more then 15 cm thick including ramming, watering, compaction etc. complete for pipe bedding and surrounding as per drawing and as directed by the Engineer-in-Charge. Width of bedding ( Outer diameter of pipe + 500mm ) Cum 2000.000 194.71 0.00 0
308 EPS-424 1. Cost for Installation of STP in all respect Job 8000000.000 1.00 0.00 0
309 EPS-425 2. Cost for Operation during defect liability period including wear and tear for electrical and mechanical parts. Job 200000.000 1.00 0.00 0
310 EPS-426 3. Cost for Operation and Maintenance for First year after completion of defect liability period including wear and tear for electrical and mechanical parts. Job 200000.000 1.00 0.00 0
311 EPS-427 4. Cost for Operation and Maintenance for Second year after completion of defect liability period including wear and tear for electrical and mechanical parts. Job 200000.000 1.00 0.00 0
312 EPS-428 5. Cost for Operation and Maintenance for Third year after completion of defect liability period including wear and tear for electrical and mechanical parts. Job 200000.000 1.00 0.00 0
313 EPS-429 6. Cost for Operation and Maintenance for Forth year after completion of defect liability period including wear and tear for electrical and mechanical parts. Job 200000.000 1.00 0.00 0
314 EPS-430 7. Cost for Operation and Maintenance for Fifth year after completion of defect liability period including wear and tear for electrical and mechanical parts. Job 200000.000 1.00 0.00 0
315 RWH-432 Dry stone pitching 22.5 cm thick including supply of stones and preparing surface complete. Sqm 500.000 679.10 0.00 0
316 RWH-433 20 mm cement plaster of mix : 1:4 (1 cement: 4 fine sand) Sqm 225.000 482.20 0.00 0
317 RWH-434 Boring/drilling bore well of required dia for casing/ strainer pipe, by suitable method prescribed in IS: 2800 (part I), including collecting samples from different strata, preparing and submitting strata chart/ bore log, including hire & running charges of all equipments, tools, plants & machineries required for the job, all complete as per direction of Engineer -in-charge, upto 90 metre depth below ground level. All types of soil 300 mm dia Rm 375.000 210.00 0.00 0
318 RWH-435 Boring/drilling bore well of required dia for casing/ strainer pipe, by suitable method prescribed in IS: 2800 (part I), including collecting samples from different strata, preparing and submitting strata chart/ bore log, including hire & running charges of all equipments, tools, plants & machineries required for the job, all complete as per direction of Engineer -in-charge, upto 90 metre depth below ground level. All types of soil 400 mm dia Rm 500.000 20.00 0.00 0
319 RWH-436 Supplying, filling, spreading & leveling stone boulders of size range 5 cm to 20 cm, in recharge pit, in the required thickness, for all leads & lifts, all complete as per direction of Engineer-in-charge Cum 1500.000 30.56 0.00 0
320 RWH-437 Supplying, filling, spreading & leveling gravels of size range 5 mm to 10 mm, in the recharge pit, over the existing layer of boulders, in required thickness, for all leads & lifts, all complete as per direction of Engineer-incharge Cum 1500.000 30.56 0.00 0
321 RWH-438 Supplying, filling, spreading & leveling coarse sand of size range 1.5 mm to 2 mm in recharge pit, in required thickness over gravel layer, for all leads & lifts, all complete as per direction of Engineer -in-charge. Cum 1500.000 28.76 0.00 0
322 RWH-439 Supplying, assembling, lowering and fixing in vertical position in bore well,unplasticized PVC medium well casing (CM) pipe of required dia,conforming to IS: 12818, including required hire and labour charges, fittings & accessories etc. all complete, for all depths, as per direction of Engineer -in-charge. 150 mm nominal size dia Rm 550.000 91.00 0.00 0
323 RWH-440 Supplying, assembling, lowering and fixing in vertical position in bore well,unplasticized PVC medium well casing (CM) pipe of required dia,conforming to IS: 12818, including required hire and labour charges, fittings & accessories etc. all complete, for all depths, as per direction of Engineer -in-charge. 200 mm nominal size dia Rm 650.000 13.00 0.00 0
324 RWH-441 Supplying, assembling, lowering and fixing in vertical position in bore well unplasticized PVC medium well screen (RMS) pipes with ribs, conforming to IS: 12818, including hire & labour charges, fittings & accessories etc. all complete, for all depths, as per direction of Engineer-in-charge. 150 mm nominal size dia Rm 530.000 49.00 0.00 0
325 RWH-442 Supplying, assembling, lowering and fixing in vertical position in bore well unplasticized PVC medium well screen (RMS) pipes with ribs, conforming to IS: 12818, including hire & labour charges, fittings & accessories etc. all complete, for all depths, as per direction of Engineer-in-charge. 200 mm nominal size dia Rm 800.000 7.00 0.00 0
326 RWH-443 Providing and fixing suitable size threaded mild steel cap or spot welded plate to the top of bore well housing/ casing pipe, removable as per requirement, all complete for borewell of: 150 mm dia. Nos. 180.000 8.00 0.00 0
327 RWH-444 Providing and fixing M.S. clamp of required dia to the top of casing/housing pipe of tubewell as per IS: 2800 (part I), including necessary bolts & nuts f required size complete. 150 mm clamp Nos. 1000.000 8.00 0.00 0
328 RWH-445 Providing and fixing Bail plug/ Bottom plug of required dia to the bottom of pipe assembly of tubewell as per IS:2800 (part I): 150 mm dia. Nos. 225.000 8.00 0.00 0
329 LH-447 Trenching in ordinary soil upto a depth of 60 cm including removal and stacking of serviceable materials and then disposing of surplus soil, by spreading and neatly leveling within a lead of 50m and making up the trenched area to proper levels by filling with earth or earth mixed with sludge or/and manure before and after flooding trench with water (excluding cost of imported eart, sludge or manure) cum 60.000 1337.00 0.00 0
330 LH-448 Supplying and stacking of good earth at site including royalty and carriage upto 5 km (earth measured in stacks will be reduced by 20% for payment) cum 400.000 3972.00 0.00 0
331 LH-449 Supplying and stacking sludge at site including royalty and carriage upto 5 km (earth measured in stacks will be reduced by 8% for payment cum 230.000 794.40 0.00 0
332 LH-450 uprooting weeds from the trenched area after 10 to 15 days of its flooding with water including disposal of uprooted vegetation sqm 3.000 26071.00 0.00 0
333 LH-451 fine dressing of ground sqm 2.000 26071.00 0.00 0
334 LH-452 Grassing with selection no.1 grass including watering and maintenance of the lawn for 60 days or more till the grass forms a thick lawn, free from weeds and fit for mowing including supplying good earth, if needed (the grass and good earth shall be paid for seperately): In rows 5 cm apart of both direction. sqm 10.000 26071.00 0.00 0
335 LH-453 Supplying and stacking of Selection No.-1 Grass at site fresh and free from weeds having proper roots in green including loading, unloading, carriage and all taxes paid etc. and as per direction of officer in charge. sqm 50.000 26071.00 0.00 0
336 LH-454 Preparation of beds for hedging and shrubbery by excavating 60cm deep and trenching the excavated base to a further deoth of 30cm refilling the excvated earth after breaking clods and mixing with sludge or manure in the ratio of 8:1 (8 parts of stacked volume of rearth after redution by 20% : one part of stacked volume of sludge or manure after reduction by 8%), flooding with water, filling with earth if necessary, watering and finally fine dressing, leveling etc. including stacking and disposal of materials declared unserviceable and surplus earth by spreading and leveling and directed, within a lead of 50m. lift upto 1.5m complete (cost of sludge, manure or extra earth to be paid for seperately) cum 125.000 3120.00 0.00 0
337 LH-455 Digging holes in ordinary soil and refilling the same with the exavated earth mixed with manure or sludge in the ratio of 2:1 by volume (2 parts of stacked volume of earth after reduction by 20% : 1 part of stacked volume of manure after reductin by 8%9 flooding with water, dressing including remocal of rubbish and surplus earth, if any with all leads and lifts (cost of manure, sludge or extra good earth if needed to be paid for seperately) Holes 45cm dia and 45cm deep each 12.000 46686.00 0.00 0
338 LH-456 Providing and fixing M.S. flat iron tree guard 60 cm dia and 2 m high, above ground consisting 4 nos 25 x 6 mm, 2.25 m long and 8 nos 25 x 3 mm 2 m long verticals M.S. flats, riveted to 3 nos 25 x 6 mm M.S. flat iron rings in two halves, fixing together at site with required six numbers of 8 mm dia and 30 mm long bolts, including painting two coats with synthetic enamel paint of approved brand and manufacture over a coat of primer. One name plate of 1 mm thick M.S. sheet of size 250x100 mm shall be welded to the tree guard near the middle height and lettered CPWD / PWD/ any other approved name. The tree guard shall be suitably fixed to the ground by embedding four legs of tree guard in pits of suitable dia and to a depth of 25 cm, refilling the pits with soil and ramming, complete in all respect as per satisfaction and direction of Officer-in-charge. each 3000.000 292.00 0.00 0
339 LH-458 Providing and fixing at site WADELIA 6" HIGH (size of plastic bag 4" dia x6" high).The plants shall be supplied in healthy, bushy condition to the complete satisfaction of the inspection commety which shall convey its approval before actual plantation on site. each 5.000 14876.00 0.00 0
340 LH-459 Providing and fixing at site SEASONAL FLOWERS (BELIA, GENDA, BULDOZI) 9" HIGH (size of plastic bag 6" dia x 8" high).The plants shall be supplied in healthy, bushy condition to the complete satisfaction of the inspection commety which shall convey its approval before actual plantation on site. each 35.000 2193.00 0.00 0
341 LH-460 Providing and fixing at site OPHIOPOGON JAPONICUS (GREEN) 7" HIGH (size of plastic bag 4" dia x6" high).The plants shall be supplied in healthy, bushy condition to the complete satisfaction of the inspection commety which shall convey its approval before actual plantation on site. each 35.000 9208.00 0.00 0
342 LH-461 Providing and fixing at site LANATANA BLUE 6" HIGH (size of plastic bag 4" dia x6" high).The plants shall be supplied in healthy, bushy condition to the complete satisfaction of the inspection commety which shall convey its approval before actual plantation on site. each 10.000 3367.00 0.00 0
343 LH-462 Providing and fixing at site IXORA YELLOW 18" HIGH (size of plastic bag 6" dia x8" high) .The plants shall be supplied in healthy, bushy condition to the complete satisfaction of the inspection commety which shall convey its approval before actual plantation on site. each 80.000 1664.00 0.00 0
344 LH-463 Providing and fixing at site ACLYPHA - RED 2'-0" HIGH (size of plastic bag 6" dia x8" high).The plants shall be supplied in healthy, bushy condition to the complete satisfaction of the inspection commety which shall convey its approval before actual plantation on site. each 70.000 5071.00 0.00 0
345 LH-464 Providing and fixing at site AGAVE 12" HIGH (size of plastic bag 6" dia x6" high).The plants shall be supplied in healthy, bushy condition to the complete satisfaction of the inspection commety which shall convey its approval before actual plantation on site. each 250.000 135.00 0.00 0
346 LH-465 Providing and fixing at site FICUS BENJAMINA TOPAIRY 6'-0" HIGH. The plants shall be supplied in healthy, bushy condition to the complete satisfaction of the inspection commety which shall convey its approval before actual plantation on site. each 2500.000 2.00 0.00 0
347 LH-466 Providing and fixing at site GOLDEN DURANTA 6" HIGH (size of plastic bag 4" dia x6" high) .The plants shall be supplied in healthy, bushy condition to the complete satisfaction of the inspection commety which shall convey its approval before actual plantation on site. each 5.000 2600.00 0.00 0
348 LH-467 Providing and fixing at site SYNOGONIUM 9" HIGH (size of plastic bag 6" dia x6" high) .The plants shall be supplied in healthy, bushy condition to the complete satisfaction of the inspection commety which shall convey its approval before actual plantation on site. each 24.000 4540.00 0.00 0
349 LH-468 Providing and fixing at site BOTTLE BRUSH TOPAIRY ( Golden) 6'-0" HIGH. The plants shall be supplied in healthy, bushy condition to the complete satisfaction of the inspection commety which shall convey its approval before actual plantation on site. each 500.000 36.00 0.00 0
350 LH-469 Providing and fixing at site FICUS PANDA TOPAIRY 6'-0" HIGH. The plants shall be supplied in healthy, bushy condition to the complete satisfaction of the inspection commety which shall convey its approval before actual plantation on site. each 1500.000 52.00 0.00 0
351 LH-470 Providing and fixing at site FURCARIA 24" HIGH (size of plastic bag 8" dia x8" high).The plants shall be supplied in healthy, bushy condition to the complete satisfaction of the inspection commety which shall convey its approval before actual plantation on site. each 500.000 11.00 0.00 0
352 LH-471 Providing and fixing at site LANATANA YELLOW 6" HIGH (size of plastic bag 4" dia x6" high).The plants shall be supplied in healthy, bushy condition to the complete satisfaction of the inspection commety which shall convey its approval before actual plantation on site each 10.000 513.00 0.00 0
353 LH-472 Providing and fixing at site POINSETTIA 9" HIGH (size of plastic bag 6" dia x 8" high).The plants shall be supplied in healthy, bushy condition to the complete satisfaction of the inspection commety which shall convey its approval before actual plantation on site. each 275.000 1167.00 0.00 0
354 LH-473 Providing and fixing at site LANATANA PURPLE 6" HIGH (size of plastic bag 4" dia x6" high).The plants shall be supplied in healthy, bushy condition to the complete satisfaction of the inspection commety which shall convey its approval before actual plantation on site. each 10.000 417.00 0.00 0
355 LH-474 Providing and fixing at site LANATANA RED 6" HIGH (size of plastic bag 4" dia x6" high).The plants shall be supplied in healthy, bushy condition to the complete satisfaction of the inspection commety which shall convey its approval before actual plantation on site. each 10.000 417.00 0.00 0
356 LH-475 Providing and fixing at site LANATANA WHITE 6" HIGH (size of plastic bag 4" dia x6" high).The plants shall be supplied in healthy, bushy condition to the complete satisfaction of the inspection commety which shall convey its approval before actual plantation on site. each 10.000 417.00 0.00 0
357 LH-477 Providing and fixing at site BISMARKIA PALM 4' HIGH (size of plastic bag 10" dia x12" high).The plants shall be supplied in healthy, bushy condition to the complete satisfaction of the inspection commety which shall convey its approval before actual plantation on site. each 3000.000 7.00 0.00 0
358 LH-478 Providing and fixing at site FICUS BENJAMINA 96" TO 120" HIGH (size of plastic bag 12" dia x14" high).The plants shall be supplied in healthy, bushy condition to the complete satisfaction of the inspection commety which shall convey its approval before actual plantation on site. each 800.000 21.00 0.00 0
359 LH-479 Providing and fixing at site FICUS BENJAMINA VARIEGATA 24" HIGH (size of plastic bag 8" dia x10" high).The plants shall be supplied in healthy, bushy condition to the complete satisfaction of the inspection commety which shall convey its approval before actual plantation on site. each 500.000 18.00 0.00 0
360 LH-480 Providing and fixing at site ALOSTONIA SCHOLARIS 4' TO 5' HIGH (size of plastic bag 10" dia x12" high).The plants shall be supplied in healthy, bushy condition to the complete satisfaction of the inspection commety which shall convey its approval before actual plantation on site. each 75.000 46.00 0.00 0
361 LH-481 Providing and fixing at site ANTHOCEPHALUS CADAMBA 3' TO 4' HIGH (size of plastic bag 8" dia x10" high).The plants shall be supplied in healthy, bushy condition to the complete satisfaction of the inspection commety which shall convey its approval before actual plantation on site. each 50.000 23.00 0.00 0
362 LH-482 Providing and fixing at site WODYETIA BIFURCATA (FOX TAIL PALM) 120" HIGH (size of plastic bag 12" dia x14" high).The plants shall be supplied in healthy, bushy condition to the complete satisfaction of the inspection commety which shall convey its approval before actual plantation on site. each 3000.000 15.00 0.00 0
363 LH-483 Providing and fixing at site BAUHINIA BLAKEANA (Katchnaar - pink) 3' TO 4' HIGH (size of plastic bag 8" dia x10" high).The plants shall be supplied in healthy, bushy condition to the complete satisfaction of the inspection commety which shall convey its approval before actual plantation on site. each 500.000 7.00 0.00 0
364 LH-484 Providing and fixing at site BAUHINIA PURPURE (Katchnaar -purple) 3' TO 4' HIGH (size of plastic bag 8" dia x10" high).The plants shall be supplied in healthy, bushy condition to the complete satisfaction of the inspection commety which shall convey its approval before actual plantation on site. each 500.000 6.00 0.00 0
365 LH-485 Providing and fixing at site PLUMERIA ALBA 3' TO 4' HIGH (size of plastic bag 8" dia x10" high).The plants shall be supplied in healthy, bushy condition to the complete satisfaction of the inspection commety which shall convey its approval before actual plantation on site. each 500.000 21.00 0.00 0
366 LH-486 Providing and fixing at site ROYAL PALM 120" HIGH (CB) .The plants shall be supplied in healthy, bushy condition to the complete satisfaction of the inspection commety which shall convey its approval before actual plantation on site. each 1000.000 2.00 0.00 0
367 LH-487 Providing and fixing at site BOTTLE BRUSH COPPER 4' TO 5' HIGH (size of plastic bag 10" dia x12" high).The plants shall be supplied in healthy, bushy condition to the complete satisfaction of the inspection commety which shall convey its approval before actual plantation on site. each 1000.000 3.00 0.00 0
368 LH-488 Providing and fixing at site BOTTLE BRUSH GOLDEN 4' TO 5' HIGH (size of plastic bag 10" dia x12" high).The plants shall be supplied in healthy, bushy condition to the complete satisfaction of the inspection commety which shall convey its approval before actual plantation on site. each 1000.000 5.00 0.00 0
369 LH-489 Providing and fixing at site POLYALTHIA LONGIFOLIA (Spreading Ashoka) 4' TO 5' HIGH (size of plastic bag 10" dia x12" high).The plants shall be supplied in healthy, bushy condition to the complete satisfaction of the inspection commety which shall convey its approval before actual plantation each 500.000 9.00 0.00 0
370 LH-490 Providing and fixing at site CHIKRASSIA TABULARIS 4' TO 5' HIGH (size of plastic bag 10" dia x12" high).The plants shall be supplied in healthy, bushy condition to the complete satisfaction of the inspection commety which shall convey its approval before actual plantation each 100.000 40.00 0.00 0
371 LH-491 Providing and fixing at site WASHINGTON PALM 60" TO 72" HIGH (CEMENT BAG).The plants shall be supplied in healthy, bushy condition to the complete satisfaction of the inspection commety which shall convey its approval before actual plantation on site. each 7500.000 6.00 0.00 0
372 LH-492 Providing and fixing at site GREVILLEA ROBUSTA (Silver Oak) 4' TO 5' HIGH (size of plastic bag 10" dia x12" high).The plants shall be supplied in healthy, bushy condition to the complete satisfaction of the inspection commety which shall convey its approval before actual plantation each 500.000 24.00 0.00 0
373 LH-493 Providing and fixing at site JUNIPER CHINESIS 36" HIGH (size of plastic bag 10" dia x10" high).The plants shall be supplied in healthy, bushy condition to the complete satisfaction of the inspection commety which shall convey its approval before actual plantation on site. each 1000.000 5.00 0.00 0
374 LH-494 Providing and fixing at site ACACIA AURICULAIFORMIS (Autralian keekar) 4' TO 5' HIGH (size of plastic bag 10" dia x12" high).The plants shall be supplied in healthy, bushy condition to the complete satisfaction of the inspection commety which shall convey its approval before actual plantation each 70.000 16.00 0.00 0
375 LH-495 Providing and fixing at site PUTRANJVA ROXBURGHII 4' TO 5' HIGH (size of plastic bag 10"" dia x12"" high).The plants shall be supplied in healthy, bushy condition to the complete satisfaction of the inspection commety which shall convey its approval before actual plantation each 500.000 7.00 0.00 0
376 LH-496 Providing and fixing at site GULMOHAR 4' TO 5' HIGH (size of plastic bag 10" dia x12" high).The plants shall be supplied in healthy, bushy condition to the complete satisfaction of the inspection commety which shall convey its approval before actual plantation each 500.000 2.00 0.00 0
377 LH-497 Providing and fixing at site PINKASIA 4' TO 5' HIGH (size of plastic bag 10" dia x12" high).The plants shall be supplied in healthy, bushy condition to the complete satisfaction of the inspection commety which shall convey its approval before actual plantation each 500.000 2.00 0.00 0
378 LH-498 Providing and fixing at site FICUS RETUSA 4' TO 5' HIGH (size of plastic bag 10" dia x12" high).The plants shall be supplied in healthy, bushy condition to the complete satisfaction of the inspection commety which shall convey its approval before actual plantation each 75.000 7.00 0.00 0
379 EMPre-501 a) Ambient air quality monitoring Nos 14000.000 2.00 2.00 100
380 EMPre-502 b) Ambient noise level monitoring Nos 7500.000 2.00 2.00 100
381 EMPre-503 c) Water quality monitoring of surface/Ground water Nos 9000.000 1.00 0.00 0
382 EMPre-504 d) Soil Quality Monitoring Nos 7500.000 1.00 1.00 100
383 EMC-506 a) Ambient air quality monitoring Nos 14000.000 12.00 0.00 0
384 EMC-507 b) Ambient noise level monitoring Nos 7500.000 12.00 0.00 0
385 EMC-508 c) Water quality monitoring of surface/Ground water Nos 10000.000 4.00 0.00 0
386 EMC-509 d) Soil Quality Monitoring Nos 7500.000 4.00 0.00 0
387 EMC-511 a) Water Sprinkling to minimise the dust pollution during construction activities of project. It has been considered for at least 2 hours/ day for total construction period. Hour 500.000 1080.00 0.00 0
388 EMC-513 a) Environmental Management Plan Implementation training at site in every 6 Month. job 25000.000 3.00 0.00 0
389 EPS-514 P/F in position pre cast RCC manhole cover and frame of required shape and of approved quality. Rectangular shape 600x450mm internal dimensions Nos. 1500.000 11.00 0.00 0
390 EPS-515 P/F in position pre cast RCC manhole cover and frame of required shape and of approved quality. EHD - 35 : Circular shape 560 mm internal dia Nos 2000.000 24.00 0.00 0
391 TW-516 Providing and laying Tank Tiles of 1st quality confirming to IS 15622 (thickness as per manufacturer) of approved shade laid on 20mm (average) thick cement mortar 1:4 ( 1 cement :4 coarse sand) inclduing pointing the joints with white cement and matching pigments etc complete as directed by Engineer-in-Charge. Size of Tile 250x350mm sqm 1000.000 381.88 0.00 0
392 EPS-517 Providing M.S. foot rests including fixing in manholes with 20x20x10 cm cement concrete blocks 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) as per standard design : With 20x20 mm square bar. Nos. 200.000 382.00 0.00 0
393 IEWS-519 Wiring for light point/ fan ponit/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface/ recessed PVC conduit, with modular switch, modular plate, suitable Gl box and earthing the point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc. as required. Group-C for ( Non residential) Point 900.000 1407.00 0.00 0
394 IEWS-520 Wiring for light point/ fan ponit/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface/ recessed PVC conduit, with modular switch, modular plate, suitable Gl box and earthing the point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc. as required. Group-B (barrack/ hostel and Ty-4&5 residence) Point 750.000 1282.00 0.00 0
395 IEWS-521 Wiring for light point/ fan ponit/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface/ recessed PVC conduit, with modular switch, modular plate, suitable Gl box and earthing the point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc. as required. Group-A (Type 2&3 residence) Point 700.000 2298.00 0.00 0
396 IEWS-522 Wiring for twin control light point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface/ recessed PVC conduit, 2 way modular switch, modular plate, suitable Gl box and earthing the point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc Point 950.000 140.00 0.00 0
397 IEWS-523 Wiring for light/ power plug with 2x4 sq. mm FRLS PVC insulated copper conductor single core cable in surface/ recessed PVC conduit alongwith 1 No 4 sq. mm FRLS PVC insulated copper conductor single core cable for loop earthing as required. Rm 250.000 12255.00 0.00 0
398 IEWS-525 (A) 2X2.5 sq.mm. + 1X 2.5 sq.mm earth wire Rm 125.000 15890.00 0.00 0
399 IEWS-526 (B) 2X4 sq.mm. + 1X 4 sq.mm earth wire Rm 150.000 2725.00 0.00 0
400 IEWS-527 (C) 2X6 sq.mm. + 1X 6 sq.mm earth wire Rm 200.000 2100.00 0.00 0
401 IEWS-528 (D) 2X10 sq.mm. + 1X 6 sq.mm earth wire Rm 280.000 390.00 0.00 0
402 IEWS-529 (E) 4X4 sq.mm. + 2X 4 sq.mm earth wire Rm 260.000 275.00 0.00 0
403 IEWS-530 (F) 4X6 sq.mm. + 2X 6 sq.mm earth wire Rm 375.000 235.00 0.00 0
404 IEWS-531 (G) 4X16 sq.mm. + 2X 6 sq.mm earth wire Rm 700.000 745.00 0.00 0
405 IEWS-532 S/L following 2 pair, 0.5 sq mm FRLS PVC insulated copper conductor, unarmoured telephone cable in the existing PVC conduit as required. Rm 17.000 1680.00 0.00 0
406 IEWS-533 S/L co-axial TV cable RG-6 grade, 0.7 mm solid copper conductor PE insulated, shielded with fine tinned copper braid and protected with PVC sheath in the existing PVC conduit as required. Rm 25.000 4355.00 0.00 0
407 IEWS-534 Supplying and drawing of UTP 4 pair CAT 6 LAN Cable in the existing surface/ recessed Steel/ PVC conduit as require.: 1 run of cable Mtrs 30.000 5650.00 0.00 0
408 IEC-536 (A) (20mm dia) Rm 50.000 3325.00 0.00 0
409 IEC-537 (B) (25mm dia) Rm 60.000 4305.00 0.00 0
410 IEF-538 S/F suitable size Gl box with modular plate and cover in Front on surface or in recess, including providing and flxing 6 pin 5/6 & 15/16 amps modular socket outlet and 15/16 amps modular switch, connection, painting etc. as required Nos 375.000 787.00 0.00 0
411 IEF-539 S/F suitable size GI box with modular plae and cover in Front on surface or in recess, including providing and flxing 3 pin 5/6 amps modular socket outlet and 5/6 amps modular switch, connection, painting etc. as required. Nos 275.000 1385.00 0.00 0
412 IEF-540 S/F call bell/ buzzer suitable for D.C/A.C single phase, 230 volts, complete as required. Nos 100.000 124.00 0.00 0
413 IEF-541 Supplying and fixing of following ways surface/ recess mounting, vertical type, 415 V, TPN MCB distribution board of sheet steel, dust protected, duly powder painted, inclusive of 200 A, tinned copper bus bar, common neutral link, earth bar, din bar for mounting MCBs (but without MCBs and incomer) as required.(Note : Vertical type MCB TPDB is normally used where 3 phase outlets are required.) 8 way (4 + 24), Double door Nos 5400.000 1.00 0.00 0
414 IEF-543 (A) 8 way (4 + 24), Double door (Light & Power DB) Nos 5000.000 5.00 0.00 0
415 IEF-544 (B) 6 way (4 + 18), Double door (Light & Power DB) Nos 4500.000 29.00 0.00 0
416 IEF-545 (C) 4 way (4 + 12), Double door (Light & Power DB) Nos 3500.000 17.00 0.00 0
417 IEF-547 (A) 6 way, Double door (Light & Power DB) Nos 1200.000 39.00 0.00 0
418 IEF-548 (B) 8 way (2 + 6), Double door (Light & Power DB) Nos 1300.000 4.00 0.00 0
419 IEF-549 (C) 12 way (2 + 10), Double door (Light & Power DB) Nos 1500.000 108.00 0.00 0
420 IEF-550 Providing and fixing following rating and breaking capacity and pole MCCB with thermomagnetic release and terminal spreaders in existing cubicle panel board including drilling holes in cubicle panel, making connections, etc. as required. 100 A, 30kA, FPMCCB Nos 5100.000 1.00 0.00 0
421 IEF-552 (A) Single Pole Nos 220.000 2110.00 0.00 0
422 IEF-553 (B) Double Pole Nos 440.000 127.00 0.00 0
423 IEF-554 (C) Triple pole and neutral Nos 850.000 22.00 0.00 0
424 IEF-555 Supplying & fixing suitable size GI box wih modular plate and cover in front on surface or in recess including providing and fixing 25 A modular socket outlet and 25 A modular SP MCB, “C” curve including connections, painting etc. as required. Nos 500.000 171.00 0.00 0
425 IEF-556 Supplying and fixing 20 A, 240 V, SPN Industrial type socket outlet, with 2 pole and earth, metal enclosed plug top alongwith 20 A, “C” curve, SP, MCB, in sheet steel enclosure, on surface or in recess, with chained metal cover for the socket out let and complete with connections, testing and commissioning etc. as required. Nos 900.000 54.00 0.00 0
426 IEF-557 Supplying and fixing following rating, double pole, 240 V, isolator in the existing MCB DB complete with connections, testing and commissioning etc. as required.: 40 amps Nos 210.000 27.00 0.00 0
427 IEF-559 (A) 40 amps Nos 640.000 1.00 0.00 0
428 IEF-560 (B) 63 amps Nos 650.000 23.00 0.00 0
429 IEF-561 S/F single pole blanking plate in the existing MCB DB complete etc. as required. Nos 70.000 186.00 0.00 0
430 IEF-562 Supplying and fixing two module stepped type electronic fan regulator on the existing modular plate switch box including connections but excluding modular plate etc. as required. Nos 400.000 827.00 0.00 0
431 IEF-563 Supplying and fixing 3 pin, 5 A ceiling rose on the existing junction box/ wooden block including connections etc. as required. No. 42.000 3398.00 0.00 0
432 IEF-564 Providing and fixing M.V. danger notice plate of 200 mm X 150 mm, made of mild steel, at least 2 mm thick, and vitreous enameled white on both sides, and with inscription in single red colour on front side as required Nos 140.000 58.00 0.00 0
433 IEF-565 Supplying and fixing brass batten/ angle holder including connections etc. as required. No. 70.000 1452.00 0.00 0
434 IEF-567 (A) 5/6 amps switch No. 80.000 347.00 0.00 0
435 IEF-568 (B) 3 pin 5/6 amp socket outlet No. 75.000 448.00 0.00 0
436 IEF-569 (C) Telephone socket outlet No. 90.000 66.00 0.00 0
437 IEF-570 TV antenna socket outlet No. 90.000 253.00 0.00 0
438 IEF-572 (A) 1or 2 module (75mmx 75mm) No. 160.000 489.00 0.00 0
439 IEF-573 (B) 6 module (200 mmX75 mm) No. 250.000 102.00 0.00 0
440 EEW-575 (A) 100 mm width X 50 mm depth X 1.6 mm thickness mtr 325.000 175.00 0.00 0
441 EEW-576 (B) 300 mm width X 50 mm depth X 1.6 mm thickness mtr 500.000 35.00 0.00 0
442 EEW-577 Earthing with G.I. earth Plate 600mm x 600mm x 6mm thick including accesssories, and providing masonary enclosure with cover plate having locking arrangement and watering pipe etc. with charcoal or coke and salt as required. Sets 4100.000 134.00 0.00 0
443 EEW-578 Providing and fixing 25 mm x 5 mm GI strip in 40 mm dia GI pipe FRLSom earth electrode including connection with brass nut , bolt , spring , washer , excavation and re filling etc. as required. Mtrs. 4100.000 528.00 0.00 0
444 EEW-579 Providing and fixing 25 mm x 5 mm G.I. strip on surface or in recess for connections etc. as required. Mtrs. 125.000 1490.00 0.00 0
445 EEW-580 Providing and fixing 6SWG dia GI Wire on surface or in recess for loop earthing as required. ( 2 runs with each 3ph cable) Mtr 35.000 1755.00 0.00 0
446 EEW-581 Providing and fixing of lightning conductor finial, made of 25 mm dia 300 mm long.G.I. tube, having single prong at top, with 85 mm thick G.I. base plate including hole etc. complete as required each 290.000 59.00 0.00 0
447 EEW-582 Providing and fixing of GI Tape 20 mm X 3mm thick on parappet or surface of wall complete for lightingin conductor as required (horizontal run) mtr 55.000 1800.00 0.00 0
448 EEW-583 Providing and fixing of GI Tape 20 mm X 3mm thick on parappet or surface of wall complete for lightingin conductor as required (Vertical run) mtr 90.000 768.00 0.00 0
449 EEW-584 Providing and fixing testing joint, made of 20 mm x 3 mm thick G.I. strip. 125 mm long, with 4 nos. of G.I. bolts, nuts, chuck nuts ans spring washers etc. complete as each 60.000 59.00 0.00 0
450 EEW-585 Supplying and laying of following size DWC HDPE pipe ISI marked along with all accessories like socket, bend, couplers etc. conforming to IS 14930, Part II complete with fitting and cutting, jointing etc..direct in ground (75 cm below ground level) including excavation and refilling the trench but excluding sand cushioning and protective covering etc., complete as required. 120 mm dia (OD-120 mm & ID-103 mm nominal) mtr 210.000 50.00 0.00 0
451 IEF-586 Supplying and fixing of Ultra bright LED Tubelight with aluminium heat sink & polycarbonate diffuser having high efficacy suited for installation in LED Batten 1x20W LED Tube to give glare Free light. (20 W LED Tube with LED batten) Nos 1100.000 1290.00 0.00 0
452 IEF-587 Supply and fixing of heavy duty exhaust fan ,single phase 900 RPM , 300 mm sweep. Nos 3000.000 344.00 0.00 0
453 IEF-588 Supply and fixing of 1200 mm sweep , 5 star - BEE star rated ceiling fan . Nos. 2500.000 827.00 0.00 0
454 IEF-589 Supply and fixing of 7w LED Bulb for mounting on Brass Holder . Nos 450.000 1456.00 0.00 0
455 IEF-590 Supply and fixing of Linear & compact upto 14W mirror light with decorative end caps, polycarbonate body and diffuser No. 1000.000 108.00 0.00 0
456 IEF-591 Supplying and fixing of 2x2 LED flat panel for surface mounting which provides soft-light and glare free symmetrical illumination.(34 W ) Nos 4800.000 61.00 0.00 0
457 IEF-592 Supplying fixing of 1x1 LED flat panel for surface mounting which provides soft-light and glare free symmetrical illumination.(15 W ) Nos 2100.000 306.00 0.00 0
458 IEF-593 Supplying and fixing of Recess/Conceel mounted downlighter with pressure die-cast aluminium heat sink & PC diffuser in white powder coated finish with integrated driver <10% THD. (10 W LED , Round ). Nos 920.000 377.00 0.00 0
459 IEF-594 Supply , installation , testing and commsioning of 25 Liters capacity Electric Storage water heater (geyser) with energy efficency rating of 5 BEE star with complete fitting accessories, no. 7500.000 54.00 0.00 0
460 IEF-595 Supplying and installation of Energy saving, environment friendly & robust Highbay/Mediumbay LED IP65 luminaire with high efficacy , 120 W LED , Nos 12000.000 60.00 0.00 0
461 IEF-596 Supply and fixing of Ultra bright LED polycarbonate Tubelight (18W ) with <10% THD with very high efficacy suited for installation in Environmental friendly, long life, corrosion resistant, impact proof, surface mounting IP65 luminaire with PC housing & opal finish cover suitable for 2x18W T8 LED Tube. to give glare free light Nos 2900.000 49.00 0.00 0
462 IEF-597 Supply and fixing of 10W, IP 65, LED energy saving, surface mounted, decorative oval bulk head edge- LED luminaire comprising of high brightness LEDs. Nos 1500.000 36.00 0.00 0
463 IEF-598 Supply installation testing and commission of Energy saving, environmental friendly, long life, exclusive innovative die-cast aluminium IP66 flood light, suitable for highlighting architectural facade and general purpose lighting.,100W. Nos 8500.000 12.00 0.00 0
464 IEF-599 Supply, installation, testing and commissioning of Single Phase kWh meter with LCD display (1P LCD Meter 5-30A with BOX) Nos 1800.000 12.00 0.00 0
465 IEF-600 Supply and fixing of Decorative, wall mounted fixture made of polycarbonate suitable for 12 W B-22 with 7W LED bulb. Nos 3100.000 91.00 0.00 0
466 IEF-601 Supply Installation testing and Commisioning of MCCB 63 Amp , 18 Ka , in MCCB Enclouser Nos 7000.000 3.00 0.00 0
467 IEF-603 (A) 10 pair Tag block Nos 1300.000 3.00 0.00 0
468 IEF-604 (B) 20 pair Tag block Nos 1650.000 1.00 0.00 0
469 IEF-605 (C) 50 pair Tag block Nos 5000.000 1.00 0.00 0
470 IEF-606 Supply, fixing, testing & commisssioning of Modular RJ-45 with data outlet socket with grid & cover plate in suitable size of 16 SWG GI box. Nos 650.000 175.00 0.00 0
471 IEWS-608 (A) 10 pair UNARMOURED 0.5 mm ATC mtrs 90.000 50.00 0.00 0
472 IEWS-609 (B) 20 pair UNARMOURED 0.5 mm ATC mtrs 145.000 20.00 0.00 0
473 IEWS-610 (C) 50 pair UNARMOURED 0.5 mm ATC (optional) mtrs 500.000 10.00 0.00 0
474 IEWS-613 (A) 2 x 1.5 sq. mm mtrs 80.000 4500.00 0.00 0
475 IEC-615 (A) 20 mm dia mtrs. 110.000 1150.00 0.00 0
476 IEC-616 (B) 25 mm dia mtrs. 130.000 1800.00 0.00 0
477 IEC-617 Supply, installation, testing and comissioning of 21" LED Monitor for Observation and reviewing Each 12000.000 15.00 0.00 0
478 IEC-618 Supply & drawing of CCTV Cables 3+1 in surface/ recessed existing PVC conduit as required. mtrs 65.000 2400.00 0.00 0
479 IEC-619 Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/recess including cutting the wall and making good the same in case of recessed conduit as required: 25 mm Dia mtrs 65.000 2000.00 0.00 0
480 EEW-621 Building LT Panel as per specification mentioned below a) INCOMER 160 A, FP, MCCB ,25 KA - 1 No. '- 160 A, FP, Onload Changeover , –1 N.o. b) METERING & INDICATION - ON/OFF phase indicating lamps with control fuses . '- Ammeter complete with CT and selector switches as required. '- Voltmeter complete with selector switches as required. '-Multifuction Meter c) BUS BAR-as per SLD '- 200 A, TPN, Al Bus Bars with heat shrinkable PVC Sleeves SECTION –3 OUTGOINGS '- 25 A, FP, MCB–5 N.o. '- 63 A, FP, MCB–6 N.o. Nos 110000.000 2.00 0.00 0
481 EEW-623 Building LT Panel as per specification mentioned below a) INCOMER 125 A, FP, MCCB ,25 KA - 1 No. '- 125 A, FP, Onload Changeover , –1 N.o. b) METERING & INDICATION - ON/OFF phase indicating lamps with control fuses . '- Ammeter complete with CT and selector switches as required. '- Voltmeter complete with selector switches as required. '-Multifuction Meter c) BUS BAR-as per SLD '- 200 A, TPN, Al Bus Bars with heat shrinkable PVC Sleeves SECTION –3 OUTGOINGS '- 32 A, FP, MCB–6 N.o. '- 63 A, FP, MCB–2 N.o. Nos 110000.000 1.00 0.00 0
482 EEW-625 Building LT Panel as per specification mentioned below a) INCOMER 100 A, FP, MCCB ,25 KA - 1 No. '- 63 A, FP, Onload Changeover , –1 N.o. b) METERING & INDICATION - ON/OFF phase indicating lamps with control fuses . '- Ammeter complete with CT and selector switches as required. '- Voltmeter complete with selector switches as required. '-Multifuction Meter c) BUS BAR-as per SLD '- 160 A, TPN, Al Bus Bars with heat shrinkable PVC Sleeves SECTION –3 OUTGOINGS '- 25 A, FP, MCB–5 N.o. '- 63 A, FP, MCB–5 N.o. Nos 105000.000 1.00 0.00 0
483 EEW-627 Building LT Panel as per specification mentioned below a) INCOMER 125 A, FP, MCCB ,25 KA - 1 No. '- 63 A, FP, Onload Changeover , –1 N.o. b) METERING & INDICATION - ON/OFF phase indicating lamps with control fuses . '- Ammeter complete with CT and selector switches as required. '- Voltmeter complete with selector switches as required. '-Multifuction Meter c) BUS BAR-as per SLD '- 160 A, TPN, Al Bus Bars with heat shrinkable PVC Sleeves SECTION –3 OUTGOINGS '- 25 A, FP, MCB–6 N.o. '- 63 A, FP, MCB–6 N.o. Nos 110000.000 1.00 0.00 0
484 EEW-629 Building LT Panel as per specification mentioned below a) INCOMER 125 A, FP, MCCB ,25 KA - 1 No. '- 63 A, FP, Onload Changeover , –1 N.o. b) METERING & INDICATION - ON/OFF phase indicating lamps with control fuses . '- Ammeter complete with CT and selector switches as required. '- Voltmeter complete with selector switches as required. '-Multifuction Meter c) BUS BAR-as per SLD '- 160 A, TPN, Al Bus Bars with heat shrinkable PVC Sleeves SECTION –3 OUTGOINGS '- 25 A, FP, MCB–4 N.o. '- 63 A, FP, MCB–5 N.o. Nos 110000.000 1.00 0.00 0
485 EEW-631 Building LT Panel as per specification mentioned below a) INCOMER 160 A, FP, MCCB ,25 KA - 1 No. '- 160 A, FP, Onload Changeover , –1 N.o. b) METERING & INDICATION - ON/OFF phase indicating lamps with control fuses . '- Ammeter complete with CT and selector switches as required. '- Voltmeter complete with selector switches as required. '-Multifuction Meter c) BUS BAR-as per SLD '- 200 A, TPN, Al Bus Bars with heat shrinkable PVC Sleeves SECTION –3 OUTGOINGS '- 25 A, FP, MCB–5 N.o. '- 63 A, FP, MCB–6 N.o. Nos 115000.000 1.00 0.00 0
486 EEW-633 Building LT Panel as per specification mentioned below (This meter panel Shall be approved by the UPCL electricity department and made as per their meters specification before fabrication. All coordination with the concerned state electricty board shall be in the scope of contractor) a) INCOMER 80 A, FP, MCCB ,25 KA . b) METERING & INDICATION - ON/OFF phase indicating lamps with control fuses . '- Ammeter complete with CT and selector switches as required. '- Voltmeter complete with selector switches as required. c) BUS BAR-as per SLD '- 160 A, TPN, Al Bus Bars with heat shrinkable PVC Sleeves SECTION –3 OUTGOINGS '- 25 A, DP, MCB–2 N.o. '- 40 A, DP, MCB–7 N.o. '- Space for UPCL Single Phase Energy Meter - 7 No. Nos 75000.000 4.00 0.00 0
487 EEW-635 Building LT Panel as per specification mentioned below (This meter panel Shall be approved by the UPCL electricity department and made as per their meters specification before fabrication. All coordination with the concerned state electricty board shall be in the scope of contractor) a) INCOMER 80 A, FP, MCCB ,25 KA . b) METERING & INDICATION - ON/OFF phase indicating lamps with control fuses . '- Ammeter complete with CT and selector switches as required. '- Voltmeter complete with selector switches as required. c) BUS BAR-as per SLD '- 160 A, TPN, Al Bus Bars with heat shrinkable PVC Sleeves SECTION –3 OUTGOINGS '- 25 A, DP, MCB–2 N.o. '- 32 A, DP, MCB–7 N.o. '- Space for UPCL Single Phase Energy Meter - 7 No. Nos 75000.000 13.00 0.00 0
488 EEW-637 Earthing with G.I. earth Plate 600mm x 600mm x 6mm thick including accesssories, and providing masonary enclosure with cover plate having locking arrangement and watering pipe etc. with charcoal or coke and salt as required. Sets 4000.000 46.00 0.00 0
489 EEW-638 Providing and fixing 25 mm x 5 mm GI strip in 40 mm dia GI pipe from earth electrode including connection with brass nut , bolt , spring , washer , excavation and re filling etc. as required. Mtrs. 330.000 184.00 0.00 0
490 EEW-639 Providing and laying G.I. tape 32 mm X 6 mm from earth electrode directly in ground as required. Mtrs. 100.000 240.00 0.00 0
491 EEW-640 Providing and fixing 25 mm x 5 mm G.I. strip on surface or in recess for connections etc. as required. Mtrs. 120.000 450.00 0.00 0
492 EEW-641 Earthing with copper earth plate 600 mm X 600 mm X 3 mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 meter long etc. with charcoal/ coke and salt as required. Sets 8000.000 12.00 0.00 0
493 EEW-642 Providing and fixing 25 mm X 5 mm copper strip in 40 mm dia G.I. pipe from earth electrode including connection with brass nut, bolt, spring, washer excavation and re-filling etc. as required. Mtrs. 800.000 48.00 0.00 0
494 EEW-643 Providing and fixing 25 mm X 5 mm copper strip on surface or in recess for connections etc. as required. Mtrs. 670.000 150.00 0.00 0
495 EEW-644 Providing and fixing 6 SWG dia G.I. wire on surface or in recess for loop earthing along with existing surface/ recessed conduit/ submain wiring/ cable as required. Mtr 20.000 10000.00 0.00 0
496 EEW-647 (A) UPTO 35 sq mm. mtr 185.000 11256.00 0.00 0
497 EEW-648 (B) Above 35 sq. mm and upto 95 sq. mm mtr 200.000 756.00 0.00 0
498 EEW-649 (C) Above 95 sq. mm and upto 185 sq. mm mtr 210.000 480.00 0.00 0
499 EEW-650 (D) Above 185 sq. mm and upto 400 sq. mm mtr 220.000 1452.00 0.00 0
500 EEW-652 (A) UPTO 35 sq mm. mtr 130.000 4690.00 0.00 0
501 EEW-653 (B) Above 35 sq. mm and upto 95 sq. mm mtr 140.000 315.00 0.00 0
502 EEW-654 (C) Above 95 sq. mm and upto 185 sq. mm mtr 150.000 200.00 0.00 0
503 EEW-655 (D) Above 185 sq. mm and upto 400 sq. mm mtr 170.000 605.00 0.00 0
504 EEW-657 (A) UPTO 35 sq mm. mtr 15.000 1876.00 0.00 0
505 EEW-658 (B) Above 35 sq. mm and upto 95 sq. mm mtr 25.000 126.00 0.00 0
506 EEW-659 (C) Above 95 sq. mm and upto 185 sq. mm mtr 35.000 80.00 0.00 0
507 EEW-660 (D) Above 185 sq. mm and upto 400 sq. mm mtr 60.000 242.00 0.00 0
508 EEW-662 (A) UPTO 35 sq mm. mtr 20.000 938.00 0.00 0
509 EEW-663 (B) Above 35 sq. mm and upto 95 sq. mm mtr 70.000 63.00 0.00 0
510 EEW-664 (C) Above 95 sq. mm and upto 185 sq. mm mtr 80.000 40.00 0.00 0
511 EEW-665 (D) Above 185 sq. mm and upto 400 sq. mm mtr 110.000 121.00 0.00 0
512 EEW-667 (A) 4 x 10 sq.mm. Each 190.000 24.00 0.00 0
513 EEW-668 (B) 4 x 16 sq.mm. Each 240.000 8.00 0.00 0
514 EEW-669 (C) 4 x 25 sq.mm. Each 245.000 16.00 0.00 0
515 EEW-670 (D) 3.5 x 35 sq.mm. Each 270.000 96.00 0.00 0
516 EEW-671 (E) 3.5 x 50 sq.mm. Each 330.000 10.00 0.00 0
517 EEW-672 (F) 3.5 x 70 sq.mm. Each 370.000 12.00 0.00 0
518 EEW-673 (G) 3.5 x 95 sq.mm. Each 450.000 4.00 0.00 0
519 EEW-674 (H) 3.5 x 150 sq.mm. Each 550.000 4.00 0.00 0
520 EEW-675 (I) 3.5 x 185 sq.mm. Each 330.000 4.00 0.00 0
521 EEW-676 (J) 3.5 x 240 sq.mm. Each 370.000 8.00 0.00 0
522 EEW-677 (K) 3.5 x 300 sq.mm. Each 450.000 24.00 0.00 0
523 EEW-678 (L) 2 x 10 sq.mm. Each 550.000 228.00 0.00 0
524 EEW-680 (A) Above 120 sq. mm and upto 400 sq. mm Mtr. 60.000 1300.00 0.00 0
525 EEW-682 (A) 3 X185 sq mm. Each 6000.000 5.00 0.00 0
526 EEW-684 (A) 3 X185 sq mm. Each 9000.000 7.00 0.00 0
527 EEW-686 (A) 3 X185 sq mm. Each 10000.000 6.00 0.00 0
528 EEW-688 (A) 100 mm dia mtr 340.000 400.00 0.00 0
529 EEW-689 (B) 150 mm dia mtr 380.000 1500.00 0.00 0
530 EEW-690 (C) 250 mm dia mtr 450.000 600.00 0.00 0
531 EEW-691 (E) 300 mm dia mtr 560.000 200.00 0.00 0
532 EEW-692 Supplying and making cable route marker with cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size ) of size 60 cm X 60 cm at the bottom and 50 cm X 50 cm at the top with a thickness of 10cm including inscription duly engraved as required. (For HT Ring) Each 320.000 20.00 0.00 0
533 EEW-693 Supplying and fixing cable route marker with 10 cm X 10 cm X 5 mm thick G.I. plate with inscription there on, bolted /welded to 35 mm X 35 mm X 6 mm angle iron, 60 cm long and fixing the same in ground as required (For LT CABLES) Each 250.000 200.00 0.00 0
534 EEW-696 (A) Above 4.5 meter and upto 6.5 meter No. 2650.000 182.00 0.00 0
535 EEW-697 Providing and making steel pole collar with cement concrete (1 cement : 3 coarse sand : 6 stone aggregate 20 mm) of specified size and shape including form work, plastering if required, curing etc. as required. (volume of pole/ pipe not to be deducted) (For Solar Poles) cum 4500.000 22.80 0.00 0
536 EEW-698 Providing and laying in position reinforced cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) in foundation of octagonal poles base. including form work etc. as required (excluding reinforcement) (For LED octagonal Poles) cum 5200.000 28.50 0.00 0
537 EEW-699 Supplying and embedding following dia G.I. pipe (medium class) in pole collar/ foundation (during casting) for cable entry including bending the pipe to the required shape complete as required. 32 mm dia (for LED octagonal Poles) mtrs 230.000 180.00 0.00 0
538 EEW-701 (A) 2 x 1.5 sq. mm mtrs 35.000 798.00 0.00 0
539 EEW-702 Supply,Installation, testing & Commissioning of LED streetlight made up of pressure die cast housing with toughned glass and individual high power LEDs with secondary optics, IP66 protection, impact resistance of IK07 & 10 KV external SPD. (LED Lamp 48W) on 6 mtrs octagonal pole Nos. 6700.000 90.00 0.00 0
540 EEW-703 Supply and installation testing and commissioning of Solar Standalone Street Light system mentioned below includes LED street Light with in-built SCC (30 W,3150 lumen) , SPV Panel (Solar Panel Wp - 120) ,Lead Acid Battery (Battery Ah - 100) , GI Tubular Pole above ground ( 6 M TUB Pole (B)). Nos. 55000.000 90.00 0.00 0
541 EEW-705 (A) Poles with Single bracket (1000 mm) Sets 19000.000 80.00 0.00 0
542 EEW-706 (B) Poles with Double bracket (1000 mm) Sets 20000.000 10.00 0.00 0
543 EEW-707 Supply & Installation of Street Light panel (Three Phase Upto 6 KW of Load with astronomical timer and 32 TP contactor and 40 Amp MCB rating ) Sets 20000.000 3.00 0.00 0
544 EEW-708 Supply,Installation, testing & Commissioning of 12M High Mast shaft in one section suitable for 47 m/sec wind speed, with raising lowering system comprising, head frame, luminaries carriage suitable to install 06 nos luminaries in symmetrical arrangement, double drum winch, 5mm diameter SS wire rope, trailing cable, connector, integral power tool motor, manual handle, junction box, lightening finial. along with Supply and installation of foundation bolts manufactured from special steel along with nuts, washers, anchor plate and common template and Construction of suitable shallow foundation with 'M20' grade concrete for the high mast considering the safe soil bearing capacity at site as 10 T/sqmtr at 2 mt depth with all materials & labour on Hilly belt.( as per foundation drawing provided by the manufacturer and approved by the enginer in charge) .Supply and installation of 6 Nos. 160W LED Floodlight luminaire and twin dome aviation obstruction lights with two nos no. 100 W GLS lamps . It should include Supply & Installation of outdoor stand mounted feeder pillar with 32A TPN MCB incomer, single dial time switch, 25A TP contactor for the automatic switching of luminaries, power tool control with 2 no 9A contactors and raise lower push button, Incoming 35 sq. mm and out going 16 & 2.5 sq. mm termin . Provision of Earthing for High Mast including conection of High Mast earth terminal with 25X3mm GI flats with all materials & labour.as per direction . Sets 510000.000 3.00 0.00 0
545 SSTW-710 Providing and Laying in position cement concrete 1:2:4 (1 cement : 2 corase sand : 4 graded stone aggregate 20 mm nominal size) in foundation of pump , DG set ,panels , HT meter,LT Panel etc. including form work etc. as required. (for Sub Station) cum 5500.000 200.00 0.00 0
546 SSTW-717 (E) Interconnection & Earthing- Interconnection Between HT switchgear & Transformer using 1Cx3x95Sq.mm XLPE Single core cable & Interconnection between Transformer & LT switchgear using Busbars. Internal earthing connections. (Complete of all above) Job 2850000.000 2.00 0.00 0
547 SSTW-724 (E) Interconnection & Earthing- Interconnection Between HT switchgear & Transformer using 1Cx3x95Sq.mm XLPE Single core cable & Interconnection between Transformer & LT switchgear using Busbars. Internal earthing connections. (Complete of all above) Job 3400000.000 1.00 0.00 0
548 SSTW-728 (B) Outgoing VCB (2 Nos.) : 11KV, 350MVA, 18.4kA, 630 Amp, horizontal isolation type VCB with Aluminum bus bar ,Manual Operated (220V AC),Closing & tripping coil 24V DC , Rear cable box , CT : 3 Nos. 1 Phase, 11 kV 18.4 KA/ 1SEC (50/5/5A, CL 1.0/5P10, 15/15 VA(epoxy resin cast)) ,Ammeter with selector switch ,LED Indicating Lamps : (Breaker On Red,Breaker Off Green,Spring charged Blue,Trip circuit healthy White with Push Button,Auto trip indication Amber ) , Accessories : (TNC Switch,Heater with Thermostat & Switch ,Illumination Lamp with Switch ,3 Pin Plug Socket with Switch) , Protection Relay : (1 No., 4-pole, non-directional, microprocessor based IDMT 3- O/C + 1E/F element relay.) ,Auxiliary Relay Job 1400000.000 1.00 0.00 0
549 SSTW-729 Supply of HT (UE) Ar. AL XLPE Cable of size 3 C X 185 sq mm mtrs 1650.000 1300.00 0.00 0
550 SSTW-731 (A) 4 x 10 sq.mm.Al Ar. XLPE Cable mtr. 140.000 1875.00 0.00 0
551 SSTW-732 (B) 4 x 16 sq.mm.Al Ar. XLPE Cable mtr. 180.000 890.00 0.00 0
552 SSTW-733 (C) 4 x 25 sq.mm.Al Ar. XLPE Cable mtr. 200.000 1705.00 0.00 0
553 SSTW-734 (D) 3.5 x 35 sq.mm.Al Ar. XLPE Cable mtr. 240.000 7290.00 0.00 0
554 SSTW-735 (E) 3.5 x 50 sq.mm.Al Ar. XLPE Cable mtr. 320.000 355.00 0.00 0
555 SSTW-736 (F) 3.5 x 70 sq.mm.Al Ar. XLPE Cable mtr. 430.000 655.00 0.00 0
556 SSTW-737 (G) 3.5 x 95 sq.mm.Al Ar. XLPE Cable mtr. 600.000 250.00 0.00 0
557 SSTW-738 (H) 3.5 x 150 sq.mm.Al Ar. XLPE Cable mtr. 770.000 400.00 0.00 0
558 SSTW-739 (I) 3.5 x 185 sq.mm.Al Ar. XLPE Cable mtr. 970.000 400.00 0.00 0
559 SSTW-740 (J) 3.5 x 240 sq.mm.Al Ar. XLPE Cable mtr. 1210.000 1220.00 0.00 0
560 SSTW-741 (K) 3.5 x 300 sq.mm.Al Ar. XLPE Cable mtr. 1500.000 1200.00 0.00 0
561 SSTW-742 (L) 2 x 10 sq.mm.Al Ar. XLPE Cable mtr. 110.000 7000.00 0.00 0
562 SSTW-760 Complete in all respect as above (Complete Job) Job 200000.000 1.00 0.00 0
563 SSTW-777 Complete in all respect as above (Complete Job) Job 200000.000 1.00 0.00 0
564 SSTW-794 Complete in all respect as above (Complete Job) Job 190000.000 1.00 0.00 0
565 SSTW-813 Complete in all respect as above (Complete Job) Job 225000.000 1.00 0.00 0
566 SSTW-827 Complete in all respect as above (Complete Job) Job 150000.000 1.00 0.00 0
567 SSTW-840 Complete in all respect as above (Complete Job) Job 200000.000 1.00 0.00 0
568 SSTW-853 Complete in all respect as above (Complete Job) Job 250000.000 1.00 0.00 0
569 SSTW-866 Complete in all respect as above (Complete Job) Job 290000.000 2.00 0.00 0
570 SSTW-880 Complete in all respect as above (Complete Job) Job 130000.000 1.00 0.00 0
571 SSTW-881 Supply,Installation, testing & Commissioning of 380 KVA Silent DG set with AMF PANELcomprising of Suitable Engine coupled to 415V 380 KVA alternator both mounted on common Base frame with other standard accessories i.e. Fuel tank, Anti vibration pad, Batteries with leads. along with standard panel . (for detailed specification please ref to General Specifications for Electrical Works, PART -VII DG SETS,2013,CPWD Document) CPCB-II Approved Nos 3500000.000 2.00 0.00 0
572 FFS-884 Supply, Installation, Testing and Commissioning of Electric Driven Main Fire Pump suitable for auto/manual operation and consisting of horizontal centrifugal end suction back pull out type, bronze impeller, capable to delivery 2280LPM at 70mtr. head. The pump shall be coupled to TEFC motor of 75HP with speed of 1800RPM and complete set shall mounted on common base frame, mechanical seal. The quoted rate shall includes providing & fixing of inter connecting cable, coupling, coupling guard, AVM pad etc. Nos. 275000.000 1.00 0.00 0
573 FFS-885 Supply, Installation, Testing and Commissioning of Electric Driven Jockey Fire Pump suitable for auto/manual operation and consisting of horizontal centrifugal end suction back pull out type, bronze impeller, capable to delivery 180LPM at 70mtr. head. The pump shall be coupled to TEFC motor of 20HP with speed of 1800RPM and complete set shall mounted on common base frame, mechanical seal. The quoted rate shall includes providing & fixing of inter connecting cable, coupling, coupling guard, AVM pad etc. Nos. 140000.000 1.00 0.00 0
574 FFS-886 Supply, Installation, Testing and Commissioning of Diesel Engine Driven Fire Pump suitable for auto/manual operation and consisting of horizontal centrifugal end suction back pull out type, bronze impeller, capable to delivery 2280 Lpm at 70mtr. head app. The pump shall coupled to suitable HP of Diesel engine radiator water cooled type with speed of 1800RPM and complete set shall be mounted on common base frame. 12V Batteries & battery leads with valves, fuel tank, Mechanical Seal, AVM pad. The quoted rate shall includes intercutting cable, coupling guard, and other standard accessories etc. Set. 650000.000 1.00 0.00 0
575 FFS-936 Complete in all respect as above (Complete Job) Job 160000.000 1.00 0.00 0
576 FFS-938 (A) 4C X 50Sq.mm for main pump ( aluminum armored) Rm 350.000 50.00 0.00 0
577 FFS-939 (B) 4C X 10Sq.mm for jockey pump.( aluminum armored) Rm 130.000 50.00 0.00 0
578 FFS-940 (C) 2C X 1.5Sq.mm for pressure switch (copper unarmored) Rm 100.000 100.00 0.00 0
579 FFS-941 (D) 6C X 1.5Sq.mm for diesel engine (copper unarmored) Rm 150.000 50.00 0.00 0
580 FFS-943 (A) 25mm (app.) RM 300.000 300.00 0.00 0
581 FFS-944 (B) 50mm (app.) RM 600.000 794.74 0.00 0
582 FFS-945 (C) 80mm (app.) RM 950.000 1075.00 0.00 0
583 FFS-946 (D) 100mm (app.) RM 1500.000 188.23 0.00 0
584 FFS-947 (E) 150mm (app.) RM 1900.000 2720.44 0.00 0
585 FFS-948 (F) 200mm (app.) RM 2900.000 2286.04 0.00 0
586 FFS-950 (A) 50mm (app.) RM 325.000 794.74 0.00 0
587 FFS-951 (B) 80mm (app.) RM 360.000 75.00 0.00 0
588 FFS-952 (C) 100mm (app.) RM 460.000 188.23 0.00 0
589 FFS-953 (D) 150mm (app.) RM 530.000 2720.44 0.00 0
590 FFS-954 (E) 200mm (app.) RM 675.000 2286.04 0.00 0
591 FFS-955 Supply, installation, testing and commissioning of stainless steel single headed landing valve conforming to IS - 5290 with 63 mm dia. instantaneous female coupling on the outlet with PVC blonde cap and chain, necessary companion flanges, nuts, bolts, washer and gasket complete as per specification. (ISI marked) Nos. 6000.000 123.00 0.00 0
592 FFS-956 Supply, installation, testing and commissioning of 63 mm dia. 15m long reinforce rubber lined hose pipe including stainless steel male and female instantaneous type coupling, machine wound with copper wire complete in all respects. (ISI marked) Nos. 5750.000 246.00 0.00 0
593 FFS-957 Supply, installation, testing and commissioning of 63mm dia. stainless steel short branch pipe nozzle suitable for instantaneous connection to hose coupling as required. Nos. 2750.000 123.00 0.00 0
594 FFS-959 Size: 750mm x 600mm x 300mm Nos. 3400.000 123.00 0.00 0
595 FFS-961 (A) 50 mm dia Nos. 2000.000 70.00 0.00 0
596 FFS-962 (B) 80 mm dia Nos. 3500.000 4.00 0.00 0
597 FFS-963 (C) 100 mm dia Nos. 3800.000 12.00 0.00 0
598 FFS-964 (D) 150 mm dia Nos. 6400.000 45.00 0.00 0
599 FFS-965 (E) 200 mm dia Nos. 10000.000 40.00 0.00 0
600 FFS-967 (A) 50 mm dia. Nos. 2000.000 1.00 0.00 0
601 FFS-968 (B) 80 mm dia. Nos. 3000.000 2.00 0.00 0
602 FFS-969 (C) 100mm dia. Nos. 3500.000 2.00 0.00 0
603 FFS-970 (D) 150 mm dia. Nos. 6000.000 6.00 0.00 0
604 FFS-972 (A) 100 mm dia Nos. 8500.000 1.00 0.00 0
605 FFS-973 (B) 150 mm dia Nos. 11000.000 1.00 0.00 0
606 FFS-975 (A) 100 mm dia Nos. 8000.000 1.00 0.00 0
607 FFS-976 (B) 150 mm dia Nos. 10000.000 2.00 0.00 0
608 FFS-977 Supply, installation of air vessel tank 250 mm dia. x 1.5 M high with dished top, made of minimum 6 mm thick M.S. pipe complete with 25 mm dia. brass air valve (Ball valve, pressure gauge), 25 mm dia. brass stop cock, nipple, tees, elbow, pipe and all accessories as required including fixing brackets. Nos. 23000.000 1.00 0.00 0
609 FFS-978 Supply, installation and testing of 100 mm dia pressure gauge on pump delivery line with isolation cock suitable for 10kg/cm2 Nos. 1200.000 12.00 0.00 0
610 FFS-979 Supply, Installation, Testing and Commissioning of pressure switch for auto pressure maintain. Nos. 2600.000 3.00 0.00 0
611 FFS-980 Supply, installation and testing of 150mm dia four way fire brigade inlet connection consisting of 63mm instantaneously gun matel male coupling and a check valve protected by cap scored with a chain glass bore etc. Nos. 10000.000 2.00 0.00 0
612 FFS-981 RCC Core Cutting including finishing complete in all respect up to 200 mm dia Nos. 1200.000 1.00 0.00 0
613 FFS-982 Supply, Installation, Testing and Commissioning of monoblock Electric Pump, The pump shall be jointing to TEFC motor of 5HP Nos. 25000.000 2.00 0.00 0
614 FFS-983 Supply, Installation, Testing and Commissioning of monoblock Electric Pump, The pump shall be jointing to TEFC motor of 7.5HP Nos. 35000.000 2.00 0.00 0
615 FFS-984 Providing ,fixing and testing of DOL Starter with 3 Phase power supply. Set 11000.000 4.00 0.00 0
616 FFS-987 (A) 50 mm dia Nos 1500.000 1.00 0.00 0
617 FFS-988 (B) 80 mm dia Nos 2500.000 1.00 0.00 0
618 FFS-989 (C) 100 mm dia Nos 3500.000 1.00 0.00 0
619 FFS-990 (D) 150 mm dia Nos 5000.000 4.00 0.00 0
620 FFS-991 Supply, installation, testing and commissioning of swinging type first aid fire hose reel of 20mm dia and 30mtr. length made rein forced rubber tubing, MS drum with fixing bracket with 5mm shut off nozzle. Nos. 8400.000 192.00 0.00 0
621 FFS-992 Supply, installation and testing of 25MM dia ball valve including union, hold tight, suta etc. Nos. 900.000 192.00 0.00 0
622 FFS-994 (A) 25MM Nos. 2700.000 4.00 0.00 0
623 FFS-995 Supply, installation and testing of 100 mm dia pressure gauge on pump delivery line with isolation cock suitable for 10kg/cm2 Nos. 1250.000 4.00 0.00 0
624 FFS-997 (A) 50MM Nos. 2600.000 8.00 0.00 0
625 FFS-999 (A) 4C X 6Sqmm (Aluminum Armored) RM 140.000 1000.00 0.00 0
626 FFS-1001 Supply, laying, testing and commissioning of 1.5 Sq.mm PVC insulated copper conductor single core wire in the existing PVC conduit as required. RM 25.000 500.00 0.00 0
627 FFS-1002 Supply, laying, testing and commissioning of 20mm PVC conduit along with accessories complete as required. RM 60.000 450.00 0.00 0
628 FFS-1004 Supply and installation of ABC 4Kg type fire extinguishers. Nos. 2500.000 192.00 0.00 0
629 FFS-1005 Supply and installation of CO2 4.5Kg type fire extinguishers. Nos. 7000.000 192.00 0.00 0
630 FFS-1006 Supply and installation of Mechanical Foam 9Ltr. Type fire extinguishers. Nos. 3100.000 2.00 0.00 0
631 FFS-1007 Supply and installation of Mechanical Foam 50Ltr. Type fire extinguishers. Nos. 19000.000 2.00 0.00 0
632 FFS-1009 Sand Bucket Nos. 450.000 7.00 0.00 0
633 FFS-1010 Water Bucket Nos. 450.000 7.00 0.00 0
634 FFS-1011 FIRE Hook Nos. 1300.000 2.00 0.00 0
635 FFS-1012 Fire Beater Nos. 1250.000 2.00 0.00 0
636 FFS-1013 Six Fire Bucket stand Nos. 400.000 1.00 0.00 0
637 SWHS-1015 Supply ,installation, testing and commissioning of solar hot water heater system including flat plate collector insulated hot water storage tank Lpd. 350.000 6500.00 0.00 0
638 SF-1018 a) 1000-2500 Mtr 5 Joules in head of unit job 35000.000 1.00 0.00 0
639 SF-1020 8 Rows with 9 ft. poles running meter cost Rm 225.000 2500.00 0.00 0
640 SF-1022 Power-over-Ethernet (48 VDC nominal) PoE Standard IEEE 02.3af (802.3at Type 1, Class 3) Maximum Power Consumption 12 VDC: 5.55 W 24 VAC: 5 W PoE: 6 W Certifications and Approvals Standards SMPTE 274M-2008 and SMPTE 296M-2001 (color representation complies with ITU-R BT.709) EN 60950-1 UL 60950-1 CAN/CSA-C22.2 NO. 60950-1-03 EN 50130-4 EN 50130-5, Class II (indoor in general, fixed equipment) FCC Part15 Subpart B, Class B EMC directive 2014/30/EU EN 55032 class B EN 55024 AS/NZS CISPR 32 (equal to CISPR 32) ICES-003 Class B VCCI J55022 V2/V3 EN 50121-4 ONVIF Conformance EN 50132-5-2 IEC 62676-2-3 Certifications CE, FCC, UL, cUL, RCM, CB, VCCI, EAC Environmental Operating Temperature -4 to 122°F / -20 to 50°C Storage Temperature -22 to 158°F / -30 to 70°C Humidity 20 to 90% relative humidity (non-condensing) Mechanical 3-Axis Adjustment Pan/Tilt/Rotation: 350/130/330° Material Dome Bubble: Polycarbonate, clear with anti-scratch coating Color RAL 9003, RAL 9017 Dimensions 5.32 x 4"" / 135 x 102 mm Weight 0.99 lb / 0.45 kg Set 80000.000 62.00 0.00 0
641 SF-1024 Streaming Multiple configurable streams in H.264 or H.265 and MJPEG, Local Storage AM Internal: 60 sec pre-alarm recording Memory Card Slot Supports up to 32 GB microSDHC / 2 TB microSDXC card. (A memory card of Class 6 or higher is recommended for HD recording) Recording Continuous Ring recording Alarm/events/schedule recording Software System Detection Via IP Helper Configuration Via web browser or Configuration Manager Firmware Updates Remotely programmable Video Security App Bosch Video Client or third-party software Network Protocols IPv4, IPv6, UDP, TCP, HTTP, HTTPS, RTP/ RTCP, IGMP V2/V3, ICMP, ICMPv6, RTSP, FTP, Telnet, ARP, DHCP, APIPA (Auto-IP, link local address), NTP (SNTP), SNMP (V1, MIBII), 802.1x, DNS, DNSv6, DDNS PoE (48 VDC nominal) PoE Standard IEEE 802.3af (802.3at Type 1, Class 3) Maximum Power Consumption 12 VDC: 950 mA 24 VAC: 750 mA PoE: 260 mA Certifications and Approvals Standards SMPTE 274M-2008 and SMPTE 296M-2001 (color representation complies with ITU-R BT.709) IEC 62471 EN 60950-1 cUL 60950-1 EN 60950-22 cUL 60950-22 CAN/CSA-C22.2 NO. 60950-1-07 EN 50130-4 EN 50130-5, Class IV outdoor in general) FCC Part15 Subpart B, Class B EN 55032 EN 61000-3-2 EN 61000-3-3 EN 55024 AS/NZS CISPR 32 ICES-003 Class B VCCI J55022 V2/V3 EN 50121-4 ONVIF Conformance EN 50132-5-2 IEC 62676-2-3 Certifications CE, FCC, UL, cUL, C-tick, CB, VCCI, EAC Ingress Protection IP67 Impact Protection IK10 Environmental Operating Temperature -40 to 6 Dimensions 10.7 x 3.5 x 3.5"" / 271 x 90 x 90 mm without mounting bracket Weight Camera: 2.9 lb / 1.3 kg Mounting Bracket: 1.48 lb / 0.67 kg Set 20000.000 10.00 0.00 0
642 SF-1025 Supply, installation, testing and comissioning of 16 channel IP AC Input External Power Adapter: 100 to 240 VAC; 50 to 60 Hz; 1.5 A Battery RTC Battery on Main PCB: Lithium CR2032, 3 VDC DC Output Power Adapter: 12 VDC; 5 A DVR Power Input 12 VDC Maximum Power Consumption Main (No HDD): 8.7 W Environmental Temperature Operating: 32 to 104°F / 0 to 40°C Storage: -40 to 158°F / -40 to 70°C Humidity Operating: <93% non-condensing Storage: <95% non-condensing Storage Capacity 2 x 6 TB No HDD Maximum Speed 6 Gb/s per HDD Motion Detection Set by Recorder: 396 detection zones on screen Set by Camera: Essential or Intelligent Video Analytics (IVA) Activation Video loss, motion detection, input alarm, and system alarm Event Triggered Recording, PTZ movement, alarm out, email, buzzer, screen message, Mon A and B activated Inputs 4 inputs configurable NO/NC Maximum Input Voltage: 5 VDC Outputs 2 relay outputs Relay Contacts Maximum rated, 30 VDC, 2 A continuous or 125 VAC, 1 A (activated) Data Backup USB Flash memory or external HDD (FAT32) Network Video client or web client software Playback Multi-Channel Input Simultaneous 1/4/9/16 channels Mode Forward, reverse, slow play, fast play, and frame-by-frame Search Time, channel, type, and smart Network Video client, web client, and app View Restriction Restricts video by user rights for viewing Protection Protects video against overwriting Time Retention: Automatically deletes recordings after 1 to 365 days Recording Decoding Decoding Compression: H.265/H.264/MJPEG Speed Maximum 30 fps per channel, configurable Bit Rate 16 kb/s to 24 Mb/s per channel Recording Intervals 1 to 120 minutes (default 60 minutes) Pre-Record: 1 to 30 seconds Post-Record: 10 to 300 seconds Mode Manual, Scheduled (regular, motion detection, alarm), and Stop Resolution 8MP, 6MP, 5MP, 3MP, 1.3MP, 1080p, 720p including Hard disk 4TB (tera byte) Supports up to 64 HD Camera and nesseccory connectors as required. Set 20000.000 6.00 0.00 0
643 SF-1026 Supplying, installation, testing and commissioning of microprocessor based intelligent addressable main fire alarm panel, central processing unit with the following loop modules and capable of supporting not less than 240 devices (including detectors) and minimum 120 detectors per loop and loop length up to 2 km, network communication card, minimum 320 character graphics/ LCD display with touch screen or other keypad and minimum 4000 events history log in the non volatile memory (EPROM), power supply unit (230 ± 5% V, 50 hz), 48 hrs back-up with 24 volt sealed maintenance free batteries with automatic charger. The panel shall have facility to connect printer to printout log and facility to have seamless integration with analog/digital voice evacuation system (which is part of the schedule of work under SH: PA System) and shall be complete with all accessories . The panel shall be compatible for IBMS system with open protocol BACnet/ Modbus over IP complete as per specifications. Ten Loop Panel. each 30000.000 1.00 0.00 0
644 SF-1027 Supplying, installation, testing & commissioning of central graphical fire alarm management system to centrally monitor and operate the fire alarm system complete as required each 10000.000 1.00 0.00 0
645 SF-1028 Supplying, installation, testing & commissioning of repeater panel wih 320 character/ Touch screen LCD display with inbuilt reset, acknowledge and silence switches complete as required. each 10000.000 1.00 0.00 0
646 SF-1029 Supplying, installation, testing & commissioning of intelligent nalog addressable photothermal detector complete with mounting base complete as required. each 4000.000 285.00 0.00 0
647 SF-1030 Supplying, installation, testing & commissioning of response indicator on surface/recessed MS Box having two LED, metallic cover complete with all connections etc as required. each 400.000 127.00 0.00 0
648 SF-1031 Supplying, installation, testing & commisssioning of intelligent addressable programmable sounder complete as required. each 60000.000 10.00 0.00 0
649 SF-1032 Supplying, installation, testing & commissioning of fault isolator complete with base as required. each 50000.000 10.00 0.00 0
650 SF-1033 Supplying, installation, testing & commissioning of addressable fire control module complete as required. each 100000.000 10.00 0.00 0
651 SF-1034 Supplying, installation, testing & commissioning of addressable manual call point complete as required. each 2800.000 60.00 0.00 0
652 SF-1035 Supplying, installation, testing & commissioning ofaddressable horn cum strobe complete as required. each 4500.000 60.00 0.00 0
653 SF-1036 Supplying & laying of 2x1.5 sqmm fire alarm armoured cable, 1000V rated with annealed copper conductor having XLPE insulation, steel wire armouring & FRLS outer sheath complete as required. Rm 200.000 965.00 0.00 0